Question About Wiring 6 Subs Together

[4runnerking]

Hi everyone. This is my first post so go a little easy. Been a member for a while just never spoke haha.

But My question is how would I go about wiring 6 15" 2 Ohm DVC Subs to make them run on a mono block amp and at 4 ohms. Lol Magic right. Or if this is not even possible. What is my alternatives. I have yet to purchase the amp. I was just pricing things and decided a wall of 6 15s in my 99 4runner would be a good idea. So I was curious to the wire ways of it. Also any help I can get on designing a wall and all that, to wiring my truck.

I already have 2 strips of 4 gauge running from the battery under hood to the second battery in the back. Then I have 2 strips of 4 for the ground on both batts, the cap and one for the amp. Then I got 2 strips of 4 running from the batt to the .5 farad cap and one strip of 4 coming off that to the amp. I also have the Big 3/0 Mod done with Cable I got from Home Depot. It is industrial strength cable. (good and thick haha) And Im pushing two AudioPipe TXXAPX15BL 15's in a custom built 16.4 Cu. Box with a 20 inch wide 4.5 inch tall and 15 inch long port. Running a SPL DK2- amp at 2 ohm Stable.

So any input would be greatly appreciated and welcome. Maybe even a little help from Steve himself. Im wanting to get the best stuff and utilize it the best for the cheapest. But I want it to all be good stuff. Competition is what im going for. High SPL.

Thanks everyone,

- Mark

[AUDIOADDICT02]

4 ohms aint gonna happen with dem subs

[smokeumtires]

http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3

Just add two more

[smokeumtires]

Id go for the 1st one and Pray for a nice solid BOX rise...

[tlee2]

http://mobile.jlaudio.com/support_pages.php?page_id=161

no way to do it scroll to the bottom

[smokeumtires]

if it was dual 4 you could get a 1.3 ohm load... but 4 ohms

HAVE FUN

Or buy one more amp???

[4runnerking]

O ok. Well I got ya now. I wasnt sure either. everything I knew about impedences told me I couldnt but I was double checking.

The thought did occur about adding one more but Im still not sure how to fit 6 back there. Cause im wanting to install behind the rear seats. So no more than about 36 inch long 39 inch wide and I think either 42 or 46 inch tall. Think I might do just 4 and push them nice and hard. Maybe a .25 Ohm if I choose dif subs too.

Thanks everyone on the input,

- Mark