kandiman71874 Posted May 12, 2010 Report Share Posted May 12, 2010 I will tell you this. If you plan to run it hard at all running die grinders and such, do not but an oil free compressor. you will melt the orings that they use as a piston ring in those units. Daily Driver 1999 Kia Sephia Kenwood DNX-893s Audison Bit One Processor 2 Dat 4.125's Sundown Audio SCV-6k Hertz hsk-165xl's Mids running active Focal V30 Series Tweeters running active Sundown Sa-8 v1's in the doors 2 Sundown Zv5 12's Lots of Hushmat Big 3+ and 3 + & 3- runs of Trystar 2/0 2 Dc Power Engineering 320 HP Alts 2017 Comp Vehicle 2006 Toyota 4 Runner Kenwood Excelon DNX-893s Audison Bit One HD DSP 4 Sundown Sa 6.5v2 Component Sets Focal Access 6.5 2 ways Sundown Audio Sax-50.4 Sundown Audio Sax-100.4 2 Dc Power 370xp Northstar agm27f Northstar agm65 2 Northstar asmagm 480's 2 Dual 1 Sundown Nightshade v3 12's 2 Sundown SCV-7500's All SMD Fuse Holders Shitload Of Sundown 1/0 120 sq ft Second Skin Damp Pro No, Its Not A Burp Truck!!!! 2016 Season 3rd place in Xtreme 1 At Finals 2016 Season 6th Place In Kaos 1 At Finals ( Blew The Subs Up In First Round Eliminations) 2 Kansas State Records Set In 2016 In Xtreme 1 And Kaos 1 In Midwest SPL David said: audio is a lifestyle, not a hobby newls1 I cant read a tape to save my life... 1/2's are ok, but other marks confuse me kingsuv only men who cant read a tape, take it in the ass kingsuv you sir, get a pink hard hat on jobsites Link to comment Share on other sites More sharing options...
David78 Posted May 12, 2010 Report Share Posted May 12, 2010 i bought this a couple years ago, and recommend it but it might not be up to your guys standard Craftsman I run my impact guns, air ratchets, and anything i throw at it. i dont really use it for grinders and cutters, i have plasma cutters and dewalts for that type of stuff.( just a suggestion.) ...............................____ ...............__________|___\____ ..;.;;.:;:;.,;.|__(O)____|____/_(O) 1978 F-150 Ranger Lariat 2 Sets of Sound-stream Components Sony Head-unit DDM Tuning 8000k's Euro Headlights (Projectors Soon) Green Led Wheel Wells Dark Red Tails Tint Link to comment Share on other sites More sharing options...
Gotloud555 Posted July 25, 2010 Report Share Posted July 25, 2010 Portable are good compressor...The bigger the better but wouldn't need that big if not doing big project work. Make sure your compressor have the power it need. Some need 120 and other higher, but the smaller compressor will work on 120 outlet.. Link to comment Share on other sites More sharing options...
Rell Posted July 29, 2010 Report Share Posted July 29, 2010 I'm looking at the Campbell Hausfeld 60-Gallon from lowes too, Need to sand and re-finish the deck in the back yard, paint the frame and belly of two cars, uss a DA sander for a few fiberglass projects. Probably end up selling the whole thing though after Im done with both of these cars here and downgrade to a smaller portable unit for tire inflating and little things like that. Link to comment Share on other sites More sharing options...
Gotloud555 Posted September 8, 2010 Report Share Posted September 8, 2010 60 gallon don't see to be that bad but not enought info of it. Do you have power to make it work? Doing alots of work in general with tools need hihger S.C.F.M.. Link to comment Share on other sites More sharing options...
Recommended Posts