Hotdog Posted March 17, 2010 Report Posted March 17, 2010 I was originally asking for help but found a PDF document on it so I had to make images of it for it to work here. The PDF said 2008/2009 Explorer/Mountaineer but looks similar to my 2003 model. answered my question of how to get the Cloths hangers out... so simple. (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
Hotdog Posted March 17, 2010 Author Report Posted March 17, 2010 Updated my question into an answer (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
mwjustic Posted January 22, 2012 Report Posted January 22, 2012 hey how did u get out the coat hangers? i'm having a real problem with those right now. 2005 ford explorer xlt limited 4x4 2 xs power d3400s 2 runs of shca mid/ highs- infinity 6x8 3 ways 2 18 ssa icons 2 aq 1200.1 @ 2 ohms 10 cubes tuned to 36 hrz
TheSamoan Posted January 22, 2012 Report Posted January 22, 2012 isn't there a little tab thing over the screw that you take a pick and pop off??
TheSamoan Posted January 22, 2012 Report Posted January 22, 2012 isn't there a little tab thing over the screw that you take a pick and pop off??
Recommended Posts
Archived
This topic is now archived and is closed to further replies.