EricR Posted June 18, 2007 Report Posted June 18, 2007 what is the EASIEST way to take 3m super adhesive off of a box....sanding with 80 grit is doing it but veryy slowly....any other way some kind of solvent????? Quote i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
BassJunkie Posted June 18, 2007 Report Posted June 18, 2007 GOOGONE http://images.google.com/imgres?imgurl=htt...cial%26hs%3DbCf Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router.
ChevyBoy Posted June 19, 2007 Report Posted June 19, 2007 GOOGONE http://images.google.com/imgres?imgurl=htt...cial%26hs%3DbCf yea lets not use a liquid and make the box swell up. Quote
David Posted June 19, 2007 Report Posted June 19, 2007 thats not enough liquid to make the wood swell up. get some rubbing alcohol and some razor blades and scrape it clean. Quote
ChevyBoy Posted June 19, 2007 Report Posted June 19, 2007 depends if you pour it on or pour it onto a rag Quote
BassJunkie Posted June 19, 2007 Report Posted June 19, 2007 depends if you pour it on or pour it onto a rag I bought this stuff in a one ounce bottle, lets just say it doesn't require much at all, a little dab on the rag and you're good to go. Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router.
BURRITO Posted June 19, 2007 Report Posted June 19, 2007 acetone will eat up all the adhesive and create a really bad booger like situation, in which usually has to be scraped clean! Quote Barretto MotorsportsTeam RFCTeam CHMTeam SMD "Blow Sand"Live Your Life Without Boundaries... http://www.jeffbarretto.acnrep.com/d_oppor...A=US_EN&BW=
DVBin916 Posted June 19, 2007 Report Posted June 19, 2007 I'v rebuilt a box just because I did not want to do the work to get the Goo off. If you work out the man hours its about the same! Quote -
EricR Posted June 19, 2007 Author Report Posted June 19, 2007 well my wife is office manager where i used to work and they have a big shop out back so i got her to let me borrow a 4 inch angle grinder with a 220 grit wheel......got about half done in less than 30 mins gonna do the rest tomorrow this way i can manually round the corners then hit it with the fine grit on my mouse sander....then glass it and paint it Quote i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.