BeatBox Posted March 27, 2010 Report Share Posted March 27, 2010 thats what my first noob install looked like lol i would go out to the junk yard and get a a harness(stock harness thats missing) to plug into an aftermarket one and then to your deck, but since you have the bose system they might different than the ones that come with out the bose sytem. Link to comment Share on other sites More sharing options...
blackandgoldl69 Posted March 27, 2010 Author Report Share Posted March 27, 2010 Link to comment Share on other sites More sharing options...
kmalinich Posted March 27, 2010 Report Share Posted March 27, 2010 Use that multimeter bro. and if the lead says 0v... try turning the car on and off, or turning the light on and off, or the dash light adjuster up and down (if you have one) Link to comment Share on other sites More sharing options...
nautical7 Posted March 27, 2010 Report Share Posted March 27, 2010 Here ya go man, hope it helps. Got this from camaro site that i visit and 93-96 should have the same wiring schematic: 1995 Chevrolet Camaro Car Radio Wiring Schematic Car Radio Battery Constant 12v+ Wire: Orange Car Radio Accessory Switched 12v+ Wire: Yellow Car Radio Ground Wire: Black Car Radio Illumination Wire: Gray Car Stereo Dimmer Wire: Brown Car Stereo Antenna Trigger Wire: Pink Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Car Audio Front Speakers Size: 6 1/2″ Car Audio Front Speakers Location: Doors Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Car Audio Rear Speakers Size: 6 1/2″ Car Audio Rear Speakers Location: Side Panels Left Rear Speaker Positive Wire (+): Yellow Left Rear Speaker Negative Wire (-): Brown Right Rear Speaker Positive Wire (+): Dark Blue Right Rear Speaker Negative Wire (-): Light Blue Link to comment Share on other sites More sharing options...
blackandgoldl69 Posted March 27, 2010 Author Report Share Posted March 27, 2010 sweet thanks man i seem to be missing a couple wires tho ? i have power,ground,acc,and six other wires that come out of the factory harness Link to comment Share on other sites More sharing options...
kmalinich Posted March 27, 2010 Report Share Posted March 27, 2010 sweet thanks man i seem to be missing a couple wires tho ? i have power,ground,acc,and six other wires that come out of the factory harness but do you have the speaker leads in the dash? you can hit them with a AA battery for a sec to test em, just to see if the cone moves. just a split second though... Link to comment Share on other sites More sharing options...
nautical7 Posted March 27, 2010 Report Share Posted March 27, 2010 Missing some wires that aren't listed or what? Link to comment Share on other sites More sharing options...
blackandgoldl69 Posted March 27, 2010 Author Report Share Posted March 27, 2010 i got the head unit hooked up and it powered up so i took one of the positive speaker wires and started testing all the loose wires only the front passengers side and factory trunk sub have speaker wires in the dash i am missing the wires for the front drivers side speaker and both sail panel speakers Link to comment Share on other sites More sharing options...
-Hobby- Posted March 27, 2010 Report Share Posted March 27, 2010 Hope you get it all figured out. I have a 94 z28 but havent started doing the audio in it yet. I plan on ditching the entire stock system and installing all new components, amps and a new head unit. Link to comment Share on other sites More sharing options...
finkster Posted March 27, 2010 Report Share Posted March 27, 2010 Start at the door panel of the non working speaker and trace the wires back to the source. DAT 4125------>RE XXX comps active Eclipse cd7000 I serve drunks for a living Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.