Jump to content

(New Videos 12/21/10) 3 15" Alpine Type ARRRRRRGHs in single CRX box tuned to 30Hz, in my Swagger Wagon

CheezyMane13

Few things I need input on for my van.  

91 members have voted

  1. 1. What name shoudl I pick???

    • Swagger Wagon
      43
    • Party Van
      11
    • Pimp Mobile
      5
    • Decimator
      15
    • Shaggin Wagon
      18

  2. 2. What type of amps should I look at for my next build???

    • Stetsom 7kd
      27
    • 3 RF T1500-1bd
      6
    • 3 RF T2500-1bd
      45
    • Some amp that can do 7k+ RMS @ 1ohm (name amp)
      13

  3. 3. Which subs for the build mentioned above???

    • 3 15" DC lvl 4 XLs
      27
    • 3 15" DC lvl 5
      34
    • 3 15" Fi BL
      2
    • 3 15" Fi BTL
      20
    • 3 subs that are dual 2ohms adn capable of around 2k RMs each
      8

Recommended Posts

alan412 Newbie

alan412

Posted
Posted

looking good

(Headunit) Pioneer DEH-P3100UB

(Speakers) Phoenix Gold RSd 65cs

(4 Channel) Alpine MRP-F300

(Subs) 2 15" Audioque SDC2.5

(Box) 7.27 cubic feet tuned to 31 Hz

(Mono Amplifier) Elemental Designs Nine.1

(Wiring) 1/0 Knukonceptz KLMX

(Batteries) 2 C&D Tech 75 a/h

Link to comment
Share on other sites
CheezyMane13 Newbie

CheezyMane13

Posted
  • Author
Posted

looking good

thanks man. I'm hoping to do a little more work this weekend on it. Depends how I'm feeling and if the weather is nice

take baby steps, u cant do it all at once unless u have a roll of 100's big enough to choke a donkey

1998 Chevy Venture "Swagger Wagon"

Kenwood Excelon KDC-X994 Headunit

3 15" Alpine Type R's in seperate T-Lines

1 RF T1500-1bd for 2 of the 15s

1 RF P1000-1bd for the single 15

3 sets of Hifonics Zeus ZXi6.5C Components( 1 more set to come for Front stage)

1 Hifonics HFi100.4 4-channel amp

Stock alt for now (DC HO SPL 400A when funds come in,currently working on buying this)

Stock battery and one Optima Redtop for now (looking at XS batteries)

3 15" Alpine Type R's (aka Swagger Wagon Build 1.0)

Swagger Wagon Build 2.0

Youtube Videos

Link to comment
Share on other sites
Flint_810 Newbie

Flint_810

Posted
Posted

So I decided I start my own thread showing you all about my new project. I have completed this build about 30-40% so far so all videos and pictures will have been taken in the last month or so. First off I will have 3 15" Alpine Type R's, a Rockford Fosgate T1500-1bd, Rockford Fosgate P1000-1bd, both for the subs. Hifonics HFi100.4 4-channel amp powering Hifonics Zeus ZXi6.5C Components.

Well lets get the pictures going. First off the first T-Line getting built.

IMG_0792.jpg

IMG_0791.jpg

IMG_0793.jpg

IMG_0794.jpg

IMG_0795.jpg

IMG_0796.jpg

IMG_0797.jpg

IMG_0798.jpg

IMG_0799.jpg

IMG_0800.jpg

IMG_0801.jpg

IMG_0802.jpg

IMG_0803.jpg

see man i knew i shouldev meet up wit cha before i had advance build my box now im jealous because you about to hook my cousin box up just how you made yours and i know it's gonna sound good as hell nice work tho see ya tomorrow mane!!!

[color="#2E8B57"]size="4"]1998 buick century

stock elcetrical for now

pioneer 3100 avh dvd HU

(12)power acoustik tweeters

(1) PA BAMF 5500

(1) FI 15" BTL HEAVY SUB!!!

(1) kenwood 720 4cahnnel amp on da way

(1) 20ft run of rockford fosgate 1/0awg

(2) 1/0awg to 4awg reducers

(2) memphis front speakers

(2) kenwwods 69ie 6x9's

(1) deep cycle batt on the way

(1) 5cft box tuned to 32hz after displacments

ALOT MORE UPGRADES TO COME!!!!![/size][/color]

Link to comment
Share on other sites
CheezyMane13 Newbie

CheezyMane13

Posted
  • Author
Posted

see man i knew i shouldev meet up wit cha before i had advance build my box now im jealous because you about to hook my cousin box up just how you made yours and i know it's gonna sound good as hell nice work tho see ya tomorrow mane!!!

Ya well get at your boys for me, I need to make some money this summer. I can build boxes for cheaper then some of the shops and they will be made better too.

take baby steps, u cant do it all at once unless u have a roll of 100's big enough to choke a donkey

1998 Chevy Venture "Swagger Wagon"

Kenwood Excelon KDC-X994 Headunit

3 15" Alpine Type R's in seperate T-Lines

1 RF T1500-1bd for 2 of the 15s

1 RF P1000-1bd for the single 15

3 sets of Hifonics Zeus ZXi6.5C Components( 1 more set to come for Front stage)

1 Hifonics HFi100.4 4-channel amp

Stock alt for now (DC HO SPL 400A when funds come in,currently working on buying this)

Stock battery and one Optima Redtop for now (looking at XS batteries)

3 15" Alpine Type R's (aka Swagger Wagon Build 1.0)

Swagger Wagon Build 2.0

Youtube Videos

Link to comment
Share on other sites
Carnag3 Newbie

Carnag3

Posted
Posted

Is there a purpose for running the speaker wire through the port?

2000 Blazer 4dr

-24" Boss 330s

-Lowered 2/3

-5000k Hids w Projector Retro

-Candy tails

-LED interior lighting

-20% tint 35% windshield

-Alpine 9886 HU

-RF P1462 Dash

-RF P1652 Front

-RF P1652 Rear

-Two 18" Fi BTLs

-MB Quart Onyx 4.80

-Two Audioque AQ2200Ds

-Xs Powerr D5100, 2 Powersafe G31s

-Knukoncepts 1/0 wire

-Mechman 270 Alt w Boost Module

-10.4 Net @ 28hz 140sq.inch of port

My Youtube Channel!!

Link to comment
Share on other sites
CheezyMane13 Newbie

CheezyMane13

Posted
  • Author
Posted

Is there a purpose for running the speaker wire through the port?

No just got lazy when we made these boxes, and kinda forgot to make terminals. So now when My third box gets built the wire is gonna have the terminals on the back near the bottom. And then I will have to do the current two boxes as well.

take baby steps, u cant do it all at once unless u have a roll of 100's big enough to choke a donkey

1998 Chevy Venture "Swagger Wagon"

Kenwood Excelon KDC-X994 Headunit

3 15" Alpine Type R's in seperate T-Lines

1 RF T1500-1bd for 2 of the 15s

1 RF P1000-1bd for the single 15

3 sets of Hifonics Zeus ZXi6.5C Components( 1 more set to come for Front stage)

1 Hifonics HFi100.4 4-channel amp

Stock alt for now (DC HO SPL 400A when funds come in,currently working on buying this)

Stock battery and one Optima Redtop for now (looking at XS batteries)

3 15" Alpine Type R's (aka Swagger Wagon Build 1.0)

Swagger Wagon Build 2.0

Youtube Videos

Link to comment
Share on other sites
spl4life Newbie

spl4life

Posted
Posted

looks good man... nice flex...

i got a suggestion for you that may get you more pressure... try flipping your box around... sub and port back... port closest to the floor... OR port up closest to the rear hatch...

if your wondering why... here is my theory... same theory why in sedans/ trunk cars... sub and port as far back as possible is the loudest.

since your setup isnt sealed around the box like a wall... your getting a lot of "wasted air space" that is not be utilized effectively by your port... unless its exactly 9.83 ft from where your port is now to your windshield... i believe it will be louder if you do either sub back/port back or sub up/port up...

test it out... play some tones now...flip the box... play the same tones... and see if its louder/sounds better by ear... if it doesnt... just flip em back...

My first truck... My first Real build...

*Update 8/9/10 DC Power 270xp Alt is In!!!*

1997 Toyota T-100 DC Level 5 18" in a T-line

Everybody wants their system to be....

1. Cheap

2. Reliable

3. Loud

...you can only pick two.

micahmye hertz pack

Link to comment
Share on other sites
CheezyMane13 Newbie

CheezyMane13

Posted
  • Author
Posted

looks good man... nice flex...

i got a suggestion for you that may get you more pressure... try flipping your box around... sub and port back... port closest to the floor... OR port up closest to the rear hatch...

if your wondering why... here is my theory... same theory why in sedans/ trunk cars... sub and port as far back as possible is the loudest.

since your setup isnt sealed around the box like a wall... your getting a lot of "wasted air space" that is not be utilized effectively by your port... unless its exactly 9.83 ft from where your port is now to your windshield... i believe it will be louder if you do either sub back/port back or sub up/port up...

test it out... play some tones now...flip the box... play the same tones... and see if its louder/sounds better by ear... if it doesnt... just flip em back...

If you look at my youtube channel, when i only had one in they were firing towards the back, but now since I have two I wanted them front firing. And since my third box is getting built, It will go in the middle, and I am gonna wall off the rest of the sides. But if I did turn my subs around it would be a almost like a 6th order box, using the space between the middle as the other tuning frequencies. Im not sure on this but I think it might look and act like one. Also seeing these boxes weigh ~200+lbs each, I wont be doing much moving of them by myself.

take baby steps, u cant do it all at once unless u have a roll of 100's big enough to choke a donkey

1998 Chevy Venture "Swagger Wagon"

Kenwood Excelon KDC-X994 Headunit

3 15" Alpine Type R's in seperate T-Lines

1 RF T1500-1bd for 2 of the 15s

1 RF P1000-1bd for the single 15

3 sets of Hifonics Zeus ZXi6.5C Components( 1 more set to come for Front stage)

1 Hifonics HFi100.4 4-channel amp

Stock alt for now (DC HO SPL 400A when funds come in,currently working on buying this)

Stock battery and one Optima Redtop for now (looking at XS batteries)

3 15" Alpine Type R's (aka Swagger Wagon Build 1.0)

Swagger Wagon Build 2.0

Youtube Videos

Link to comment
Share on other sites
GoreMasterCustomAudio Newbie

GoreMasterCustomAudio

Posted
Posted

see man i knew i shouldev meet up wit cha before i had advance build my box now im jealous because you about to hook my cousin box up just how you made yours and i know it's gonna sound good as hell nice work tho see ya tomorrow mane!!!

also if u go up to dukes on Dort and ask for me my name is Mathew I can probly build u one. And if they don't was me to there's always the hush hush and I can get one built in one day for you. Uncarpited/painted thow.

I can't stop building!!!


4 DC LeveL 4XL 18 Blow Through Re-Build
The newest addition My '97 Ford Explorer Build
My First Build 8 RF P1 12's
My Myspace Add Me
My Facebook Add Me

oh, your a hypocrite too bro.....your mom has my name on her left tit - and you still like her dont you?

If youre masturbating to that sub already, wait until you get a real sub... I think your nutsack will shrivel up.
Link to comment
Share on other sites
CheezyMane13 Newbie

CheezyMane13

Posted
  • Author
Posted

also if u go up to dukes on Dort and ask for me my name is Mathew I can probly build u one. And if they don't was me to there's always the hush hush and I can get one built in one day for you. Uncarpited/painted thow.

So one day then, well should I come out to your house tomorrow night so we can install my third box. :rofl:

take baby steps, u cant do it all at once unless u have a roll of 100's big enough to choke a donkey

1998 Chevy Venture "Swagger Wagon"

Kenwood Excelon KDC-X994 Headunit

3 15" Alpine Type R's in seperate T-Lines

1 RF T1500-1bd for 2 of the 15s

1 RF P1000-1bd for the single 15

3 sets of Hifonics Zeus ZXi6.5C Components( 1 more set to come for Front stage)

1 Hifonics HFi100.4 4-channel amp

Stock alt for now (DC HO SPL 400A when funds come in,currently working on buying this)

Stock battery and one Optima Redtop for now (looking at XS batteries)

3 15" Alpine Type R's (aka Swagger Wagon Build 1.0)

Swagger Wagon Build 2.0

Youtube Videos

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...