Theone63 Posted April 25, 2010 Report Posted April 25, 2010 I WAS WONDERING SHOULD I TURN MY AMP LEVEL ALL THE WAY UP, OR LEAVE IT AT THE HALF MARK? http://www.youtube.com/user/KDIESEL334 Pioneer 5200hd 2 12'' Fi BTL N2s 1 aq 3500d.1 polk mids and highs mechman 270 3 group 34's batts
Neo_frog Posted April 25, 2010 Report Posted April 25, 2010 Ugh... FIRST TAKE OFF THE CAPS LOCK, then read the thousands of other threads on how to tune your amp. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
DirtyD78 Posted April 25, 2010 Report Posted April 25, 2010 NO you need to set it with an oscope 2003 CHEVY SILVERADO REG CAB H/U SONY W/ IPOD TOUCH new build 2 dc audio lvl4 xl's rd audio 3250 box is behind the seats below the window 3.44 after tuned@34 htz 147.3@44 htz & getting louder
JZeFF Posted April 25, 2010 Report Posted April 25, 2010 NO you need to set it with an oscope While an o-scope does work best.. it can also be done with a multi-meter. Just do some research... There is even a sticky in the amp section Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around
badfish Posted April 25, 2010 Report Posted April 25, 2010 i think only almost all the way is the way to go, maybe with a 2 farad cap just to be safe. that would work just fine........
JZeFF Posted April 25, 2010 Report Posted April 25, 2010 i think only almost all the way is the way to go, maybe with a 2 farad cap just to be safe. that would work just fine........ He is being sarcastic... don't listen to him. Just do a little bit of research in the Amplifier section... W/e you do... do not put the "level" all the way up... Half way up may even be too high depending on the set up The level is also called the Gain... just in case you didn't know that Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around
kirill007 Posted April 25, 2010 Report Posted April 25, 2010 i think only almost all the way is the way to go, maybe with a 2 farad cap just to be safe. that would work just fine........ I hope this is sarcasm. To the topic starter, search for Setting gains with DMM. Thinking is the root of all problems... You ALWAYS get what you pay for.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.