Eclipsebooom Posted May 3, 2010 Report Share Posted May 3, 2010 ok guys posted a while back about the signal to my amp goin berserk when i turn the volume all the way down and back up to 1 it also does it when i turn the volume up checked everything hooked amp to another friends HU works fine replaced RCA cables even changed HU beginning to think its something in my wiring harness signal to components is perfectly fine only the sub signal gets jumbled up any ideas? were sittin here now going through every possible reason thought maybe the remote wire is getting grounded? maybe the HU ground isnt good? please respond quick got a show tomorrow thanks in advance guys Quote Alpine CDA-9886 2x DC lvl4 15s SoundStream PCA2000D 6 cubic feet tuned 32hz Our deepest fear is not that we are inadequate. Our deepest fear is that we are powerful beyond measure. It is our light, not our darkness, that most frightens us. Your playing small does not serve the world. There is nothing enlightened about shrinking so that other people won't feel insecure around you. We are all meant to shine as children do. It's not just in some of us; it is in everyone. And as we let our own lights shine, we unconsciously give other people permission to do the same. As we are liberated from our own fear, our presence automatically liberates others. Link to comment Share on other sites More sharing options...
manofthehour Posted May 3, 2010 Report Share Posted May 3, 2010 (edited) are the RCAs picking up interference? have you tried re-routing them somewhere else? Other than that the only thing I can suggest is just making sure all the wires (if you think its the harness) go where they're supposed to go and check all the grounds... Edited May 3, 2010 by manofthehour Quote My stuff '06 Scion xA: -Alpine iDa-x100 -Alpine KTP-445 Power Pack -Polk Audio db6501 (front components) -Polk Audio db651 (back coaxials) -2 RE Audio SEX12D4s -Cadence F1200-1D - Custom box tuned to 33Hz - Kinetik HC1400 - 50 ft2 of Audio Technix sound deadner - Big 3 My photography page Link to comment Share on other sites More sharing options...
jizazz12 Posted May 3, 2010 Report Share Posted May 3, 2010 try running a separate power source and see if that help's. Quote 2007 Chevy Impala LS 1 Crescendo 3KWP 1Crescendo C1000/4 2 DC lvl 4 15's with lvl5 dual .7 coils 1Audio Control Matrix 1 Pioneer P880PRS 1 300 amp Iraggi alt All power runs done with Knu flex 0/1 guage 1 optima yellow top under the hood 1 XS 5100 and two Deka's in the trunk 4 Crescendo MP-8 mid bass drivers 2 DB Drive p5 5 D Pro Audio tweeters Link to comment Share on other sites More sharing options...
Eclipsebooom Posted May 3, 2010 Author Report Share Posted May 3, 2010 well when we replaced the RCAs i just ran em straigh back over the seats to test it real quick and didnt fix anything. and what are you saying jizazz12? Quote Alpine CDA-9886 2x DC lvl4 15s SoundStream PCA2000D 6 cubic feet tuned 32hz Our deepest fear is not that we are inadequate. Our deepest fear is that we are powerful beyond measure. It is our light, not our darkness, that most frightens us. Your playing small does not serve the world. There is nothing enlightened about shrinking so that other people won't feel insecure around you. We are all meant to shine as children do. It's not just in some of us; it is in everyone. And as we let our own lights shine, we unconsciously give other people permission to do the same. As we are liberated from our own fear, our presence automatically liberates others. Link to comment Share on other sites More sharing options...
jizazz12 Posted May 3, 2010 Report Share Posted May 3, 2010 well when we replaced the RCAs i just ran em straigh back over the seats to test it real quick and didnt fix anything. and what are you saying jizazz12? if there is a problem in your harness, it may help to run the radio on it's own. there may be some type of grounding issue in your harness. try running the radio on it's own if that doesn't help the head unit may need to be looked at. Quote 2007 Chevy Impala LS 1 Crescendo 3KWP 1Crescendo C1000/4 2 DC lvl 4 15's with lvl5 dual .7 coils 1Audio Control Matrix 1 Pioneer P880PRS 1 300 amp Iraggi alt All power runs done with Knu flex 0/1 guage 1 optima yellow top under the hood 1 XS 5100 and two Deka's in the trunk 4 Crescendo MP-8 mid bass drivers 2 DB Drive p5 5 D Pro Audio tweeters Link to comment Share on other sites More sharing options...
Eclipsebooom Posted May 3, 2010 Author Report Share Posted May 3, 2010 (edited) its gotta be in the harness cause we replaced the radio and the new one had the same problem thing is.. it worked fine for about 5 minutes when we put the alpine back in but when its on the protect light slowly comes on when it hits. doesnt happen when we run the Rcas from his car to my amp though Edited May 3, 2010 by Eclipsebooom Quote Alpine CDA-9886 2x DC lvl4 15s SoundStream PCA2000D 6 cubic feet tuned 32hz Our deepest fear is not that we are inadequate. Our deepest fear is that we are powerful beyond measure. It is our light, not our darkness, that most frightens us. Your playing small does not serve the world. There is nothing enlightened about shrinking so that other people won't feel insecure around you. We are all meant to shine as children do. It's not just in some of us; it is in everyone. And as we let our own lights shine, we unconsciously give other people permission to do the same. As we are liberated from our own fear, our presence automatically liberates others. Link to comment Share on other sites More sharing options...
manofthehour Posted May 3, 2010 Report Share Posted May 3, 2010 how does your amp go berserk? what does it sound like? Quote My stuff '06 Scion xA: -Alpine iDa-x100 -Alpine KTP-445 Power Pack -Polk Audio db6501 (front components) -Polk Audio db651 (back coaxials) -2 RE Audio SEX12D4s -Cadence F1200-1D - Custom box tuned to 33Hz - Kinetik HC1400 - 50 ft2 of Audio Technix sound deadner - Big 3 My photography page Link to comment Share on other sites More sharing options...
Eclipsebooom Posted May 3, 2010 Author Report Share Posted May 3, 2010 haha maybe berserk wasnt the best work, and its more of the signal than the amp when i turn it to 0 the subs pop? or hit and when i turn it up from 0 it does it and when i turn it up more the signal is all jumbled like hittin out of nowhere in the middle of a tone tried RCAs, had my buddy open the HU to take a look at the RCA jacks checked the amp. only thing i can think of is the harness Quote Alpine CDA-9886 2x DC lvl4 15s SoundStream PCA2000D 6 cubic feet tuned 32hz Our deepest fear is not that we are inadequate. Our deepest fear is that we are powerful beyond measure. It is our light, not our darkness, that most frightens us. Your playing small does not serve the world. There is nothing enlightened about shrinking so that other people won't feel insecure around you. We are all meant to shine as children do. It's not just in some of us; it is in everyone. And as we let our own lights shine, we unconsciously give other people permission to do the same. As we are liberated from our own fear, our presence automatically liberates others. Link to comment Share on other sites More sharing options...
manofthehour Posted May 3, 2010 Report Share Posted May 3, 2010 OH a pop, like loud? cuz when I turn my HU to zero I have a small pop noise too but its nothing loud. But my subs sound fine turned up... Have you checked all the speaker connections? Quote My stuff '06 Scion xA: -Alpine iDa-x100 -Alpine KTP-445 Power Pack -Polk Audio db6501 (front components) -Polk Audio db651 (back coaxials) -2 RE Audio SEX12D4s -Cadence F1200-1D - Custom box tuned to 33Hz - Kinetik HC1400 - 50 ft2 of Audio Technix sound deadner - Big 3 My photography page Link to comment Share on other sites More sharing options...
Eclipsebooom Posted May 3, 2010 Author Report Share Posted May 3, 2010 yepp pretty much everything it could be other than the harness Quote Alpine CDA-9886 2x DC lvl4 15s SoundStream PCA2000D 6 cubic feet tuned 32hz Our deepest fear is not that we are inadequate. Our deepest fear is that we are powerful beyond measure. It is our light, not our darkness, that most frightens us. Your playing small does not serve the world. There is nothing enlightened about shrinking so that other people won't feel insecure around you. We are all meant to shine as children do. It's not just in some of us; it is in everyone. And as we let our own lights shine, we unconsciously give other people permission to do the same. As we are liberated from our own fear, our presence automatically liberates others. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.