JMZNeal Posted May 10, 2010 Report Share Posted May 10, 2010 (edited) I finally got my 360.2 back and redid some x-overs and messed with it some. I've been working on piecing together my system for several years now. Started with me not knowing the diff between coax and components. active or passive. AB or D class. And blowing several sets of RF coax 6x9's and 2sets of RF Power components and the RF coax that are still hooked up. Now hopefully the end is in sight and I'll have a decent sound system in a single cab Ranger. I currently have: JVC AVX-44 and 360.2 Subs: 2 RF T1 12s 1ohm mono off a RF T1000.1 70hz\/ in a 2.3cube 45hz slot port Midbass: 4 RF P1 8s 2ohm mono off a RF T600.2 70hz-500hz in a tiny sealed box Mids: 2 ID XS 6x9s and 2 RF power 6x8 2ohm off a Boss 300.2 500-3khz in doors Highs: 2 ID CD.1 MH HLCD 8ohm off a RF 400.4 3khz/\ under dash mounted plumb and square #1. I need to replace the blown 6x8's with a set of ID ctx 6.5's in lower doors and ditch the Boss amp for a RF T600.2. #2. I'm debating on whether or not to get another T1000.1 for the subs and run 2ohm or get a SunDown 2000 and stay 1ohm. There pretty mean as is but ya'll know enough is never enough. #3. And I'm also debating on whether or not to put the horns on a 600.2 also or leave them on the old style 400.4. Money is the key factor but i know i'm going to do #1 period. I was thinking of ditching the 8's and running 4sets of ID drivers 70-3k and go 3 way active but IDK now I've figured out what was wrong with the 8's to begin with. (one RCA was on pass through same side as other RCA) I never even thought of that being an issue but only one channel was outputting and now they sound better so i may keep them. My truck is dirty 99% of the time but all i'm lokking for is constructive criticism on the system and any suggestions or feed back as far as SQ. I'm thinking of SQ here cuz I listen to country, rock, and rap just to beat down the neighborhood. I'll probably end up redoing all of it with fiberglass including the bed once i have a final word on the equipment. It sounds good as is minus the blowed 6x8 in door and it needs an o-scoping bad and needing sound deadening all around the cab and doors. I'm proud to say I've afro engineered all of it by myself cuz when I started this truck in 06 I was 18 and never customized anything and money is always tight. Edited May 10, 2010 by JMZNeal Quote JVC AVX-44 and 360.2 Subs: 2 RF T1 12s 1ohm mono off a RF T1500bdcp 80hz \/ in a 2.3cube 45hz slot port Mids: 2 O2 8's off a Punch 550.2 behind seat, 2 Image Cxs 6.5's and 2 ID XS 6x9s 80-3khz in doors on a T600.2 Highs: 2 ID CD.1 MH HLCD 8ohm off a RF 400.4 3khz /\ Link to comment Share on other sites More sharing options...
JMZNeal Posted May 11, 2010 Author Report Share Posted May 11, 2010 Opinions are like ass holes every one has them. I'm tough and can take it. let me have something... What about the horns. What are ppl opinions on hlcd's? Quote JVC AVX-44 and 360.2 Subs: 2 RF T1 12s 1ohm mono off a RF T1500bdcp 80hz \/ in a 2.3cube 45hz slot port Mids: 2 O2 8's off a Punch 550.2 behind seat, 2 Image Cxs 6.5's and 2 ID XS 6x9s 80-3khz in doors on a T600.2 Highs: 2 ID CD.1 MH HLCD 8ohm off a RF 400.4 3khz /\ Link to comment Share on other sites More sharing options...
huh?do-what? Posted May 18, 2010 Report Share Posted May 18, 2010 sound deaden the doors! Those holes are driving me crazy! lol Quote God damn its hot today. My balls are stuck to my leg. Link to comment Share on other sites More sharing options...
Maxim Posted May 18, 2010 Report Share Posted May 18, 2010 How do you keep blowing your speakahs? Also, I've never been a fan of coaxials for SQ but I don't think it's a huge issue. Mids/tweets in the A-pillars and/or kicks definitely help the front stage sound fuller. Quote wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt Link to comment Share on other sites More sharing options...
C-Fizzy Posted May 18, 2010 Report Share Posted May 18, 2010 more picks of the truck! other than that i believe components>coax when it comes to sound quality Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy? Link to comment Share on other sites More sharing options...
JMZNeal Posted May 18, 2010 Author Report Share Posted May 18, 2010 (edited) Don't worry I'm ditching the coax as soon as i can afford another set of ID 6.5's and i will be deadening the doors at the same time. No tweets in my truck. All horns on highs. I need to re eq the 360.2 when I get the mids worked out. Right now I have to run the horns louder than the mids to keep the blown speaker from rattling. but if It wasn't hooked up I loose all my mids.... mostly because of deadening and power issues from the boss amp....Stfu i know it sucks but it's all i had laying around when i needed one. I've blew 2 sets of speakers so far from moister. Foam baffles filled up with water and blew these 6x8's threw them son's of bitches away. 10 bucks for a water cup... and the power 6x8 components I had in stock location behind seat go wet several years ago. ???? no clue on that one... and some how i've blew 2 sets of RF punch 2way6x9's... bass probably since my deck didn't band pas them... Now my 360 band passes all my speakers for me MORE PICS coming soon but with better shit in them and less holes here's a few random old pics some are shopped though but only of body work and making it lower than it really is I've redo my gauges since this one when i put in elec valves and extra gauge. This was back in 06-07 when i thought i was going to drift around a corner in the snow. Front wheels hanging off a 30 ft drop to a creek. Had to take off roll pan so the two truck could pull me out oh yeah and i traded the Paw paw shell for my tat of my truck on my ribs... Edited May 18, 2010 by JMZNeal Quote JVC AVX-44 and 360.2 Subs: 2 RF T1 12s 1ohm mono off a RF T1500bdcp 80hz \/ in a 2.3cube 45hz slot port Mids: 2 O2 8's off a Punch 550.2 behind seat, 2 Image Cxs 6.5's and 2 ID XS 6x9s 80-3khz in doors on a T600.2 Highs: 2 ID CD.1 MH HLCD 8ohm off a RF 400.4 3khz /\ Link to comment Share on other sites More sharing options...
PUNKYOU007 Posted June 24, 2010 Report Share Posted June 24, 2010 How do you like that JVC? Quote Doethepaperboy "Bars of Pain" Doethepaperboy "Hero Remix" C. Arson d(-__-)b beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home. Link to comment Share on other sites More sharing options...
JMZNeal Posted June 25, 2010 Author Report Share Posted June 25, 2010 love it... best head ever... lol... it's got 5v preamps dvd player... very good touch screen minus the vol part. i hate having to scroll around in a circle to make the vol go up/down. i just use my remote and 3sixty knob for vol Quote JVC AVX-44 and 360.2 Subs: 2 RF T1 12s 1ohm mono off a RF T1500bdcp 80hz \/ in a 2.3cube 45hz slot port Mids: 2 O2 8's off a Punch 550.2 behind seat, 2 Image Cxs 6.5's and 2 ID XS 6x9s 80-3khz in doors on a T600.2 Highs: 2 ID CD.1 MH HLCD 8ohm off a RF 400.4 3khz /\ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.