meade916 Posted July 12, 2007 Report Share Posted July 12, 2007 Recently i purchased the 12/16v IntelliCharger from PowerMaster and after ONE DAY of use i have to say this is by far the sweetest charger ive ever laid my hands on. I have a Craftsman roll away that will be rolling away to the dark side of the garage now I didnt realize the difference till i basicly sat back and watched this little thing charge and condition the batterys in my Honda that i was having problems with. Matter of fact i was 100% positive i ruined one of my new G31 yellow tops i just got. The craftsman wires got hot trying to charge this batt that somehow came down to 7v and took the others with it. I couldnt get it to charge past 12v and then it went back down to 10.5 again. The others came back ok but this one was stubborn. Maybe the old charger is jacked up i dont know but i guess ill never know because its goin in the bone yard This new IntelliCharger brought the other batterys back to where they should be and even brought the one i was sure it died back to life!! Amazing!! They sat all nite after their "conditioning" and are all sitting at 13.0 now. While those were sitting last nite with no charge on them, i put it on my Tahoe and went to bed. I woke up to a fully charged battery bank (7 if you dont know). After a few hours here at work, they are all sitting at 13.3 and dont look like they are moving any time soon anyway, after just the first day, im giving this thing a 10 out of 10.....im sure it will be like this on the 300th day too Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
sactownstang Posted August 4, 2007 Report Share Posted August 4, 2007 Short cords and small clamps is only bads I find with this charger. Won't fit on my + Battery terminal. Performance is nice, not to quiet, plenty of options for all types. Been using it for about 2 weeks. Quote Link to comment Share on other sites More sharing options...
meade916 Posted August 5, 2007 Author Report Share Posted August 5, 2007 how long does the cord need to be? Plenty long for me. Clamps fit on my batteries just fine. the noise of a fan doesnt bother me, i charge my cars up outside, not in my bedroom at 2am. Even if i did, its only a fan, so it would be no louder then a standard computer tower anyway. Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Guest MegaloManiac Posted August 5, 2007 Report Share Posted August 5, 2007 dam this can bring back batterys to life i wish i hadnt jsut got rid of my dead yellowtop battery Quote Link to comment Share on other sites More sharing options...
meade916 Posted August 5, 2007 Author Report Share Posted August 5, 2007 not always, i have a yellow and a red that it couldnt save........they must have been way worked. I mean if you drag a battery down to .7 volts and leave it like that for a month, i dont think there is much that can be done for it. my G31 though was showing signs of being dead. 10v, couldnt bring it over 12 with my roll-away. That one was saved and is sitting at 13 right now :D Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Guest MegaloManiac Posted August 5, 2007 Report Share Posted August 5, 2007 my YT voltage was fine, it just wouldnt hold enough charge to start car for somereason?...guy at sears insisted it was because of my stereo. Im like dude arent these batteries designed for the "abuse" and i dont think it could have gone through much hell, cause my zapco is rated at 800@4 & 1100@2. so i never really needed to wire any lower than that. although i did wire to 1ohm for about a week but never really cranked it for to long. so i think it probally just needed a good "conditioner" now im stuck with an cheap everstart for now, thank god for my 200a iraggi to back me up Quote Link to comment Share on other sites More sharing options...
headshok Posted August 13, 2007 Report Share Posted August 13, 2007 Recently i purchased the 12/16v IntelliCharger from PowerMaster and after ONE DAY of use i have to say this is by far the sweetest charger ive ever laid my hands on. I have a Craftsman roll away that will be rolling away to the dark side of the garage now I didnt realize the difference till i basicly sat back and watched this little thing charge and condition the batterys in my Honda that i was having problems with. Matter of fact i was 100% positive i ruined one of my new G31 yellow tops i just got. The craftsman wires got hot trying to charge this batt that somehow came down to 7v and took the others with it. I couldnt get it to charge past 12v and then it went back down to 10.5 again. The others came back ok but this one was stubborn. Maybe the old charger is jacked up i dont know but i guess ill never know because its goin in the bone yard This new IntelliCharger brought the other batterys back to where they should be and even brought the one i was sure it died back to life!! Amazing!! They sat all nite after their "conditioning" and are all sitting at 13.0 now. While those were sitting last nite with no charge on them, i put it on my Tahoe and went to bed. I woke up to a fully charged battery bank (7 if you dont know). After a few hours here at work, they are all sitting at 13.3 and dont look like they are moving any time soon anyway, after just the first day, im giving this thing a 10 out of 10.....im sure it will be like this on the 300th day too yo meade, hows it goin, its ur friendly dude from Singapore anyway, how much is the powermaster charger? i'm getting my hands on some vatar batteries locally( they are AGM) and i'm considering getting a charger. thanks man! Cheers Quote Shok Industries Feel the POWAAAAAAAAAAAAAAAAAAAAAA!! Competition SQ Car install by Dimension Audio Singapore http://www.stevemeadedesigns.com/board/ind...showtopic=65190 Link to comment Share on other sites More sharing options...
scottiej Posted August 16, 2007 Report Share Posted August 16, 2007 yo meade, hows it goin, its ur friendly dude from Singapore anyway, how much is the powermaster charger? i'm getting my hands on some vatar batteries locally( they are AGM) and i'm considering getting a charger. thanks man! Cheers Powermaster's # 1-800-862-RACE... Quote XS POWER Batteries, Chargers & Accessories 888-4XS-POWER Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.