Need a box Design

[LoudNLow931]

Ok I have the measurements! My window lines are 18" so the box can only be 18" tall with double baffle and flush mount. Thats 60" from the seat to about 2 inches from the tail gate.

[LoudNLow931]

...

Edited June 5, 2010 by LoudNLow931

[bassl0va]

0.75"mdf will fail, change it to 1.5", otherwise, it looks good.

[LoudNLow931]

Ugh Seems like everthing I do my friend says no. He said 15 cubes is to big for two xl 15's on 6,000rms... So does some one want to make one for me lol...

The room I have is a couple posts up.

[bassl0va]

Ugh Seems like everthing I do my friend says no. He said 15 cubes is to big for two xl 15's on 6,000rms... So does some one want to make one for me lol...

The room I have is a couple posts up.

Just a quick idea

you probably want 4 cubes per woofer for 15"s

Edited June 5, 2010 by bassl0va

[AssKicker]

with 15 cubes you should add a woofer lol.

But yeah 4 a piece is plenty, no need to over do the space. Or you can consider a T-Line or Bandpass?

Edited June 5, 2010 by AssKicker

[chewie]

lol...

im sorry that 15 cubes is too damn big lol.. specially since your running a american bass 500.1

anyways whats wrong with 3/4 inch mdf? considering he will be doubling up everywhere which would probably yeild stronger than a single sheed of 1.5 inch mdf.. if you can even find it that thick.

[LoudNLow931]

They only have 1/2" and 3/4" by me. Ill probably do the one with the ports on drivers side then subs offset to the passenger side.

[chewie]

dual .75 mdf with wood glue inbetween with some strageically placed screws will be plenty.. and some 2x4s for bracing on top of the resin/glass you wanna do.. will do fine.

and joe on second thought that wont really work.. haveing the subs oriented to the passenger side.

Edited June 5, 2010 by chewie

[LoudNLow931]

What about the ports at the very bottom? And how many?