2000TACO Posted June 11, 2010 Report Posted June 11, 2010 if you are selling the AQ's pm me about a price:) loganberry, on 17 October 2009 - 11:39 PM, said: on the lows it sounds like a 90 year old vagina flapping in the wind JayP, on 10 June 2010 - 4:53 AM, said: Your truck looks like a prostitute gave the car a blow job with starburst in it's mouth.
Soapbox Posted June 11, 2010 Report Posted June 11, 2010 Are both subs equal distance in all aspects to the port mouth in the box? if they are staggered you may have an unloading issue... I have this problem currently. TEAM FLEX ISSUES, TEAM DC AUDIO 2010 California State Finals Champion MECA AS2 2011 California State Champion Meca S2 2011 California State Record holder Meca S2 2012 Meca Mod 4 class 152.5 and rising
Carnag3 Posted June 11, 2010 Author Report Posted June 11, 2010 Ok, I switched the wires from the each sub to the opposite amp. Verdict is its the amp....the other sub is now moving more. The amp with the lower gain level is powering the sub that is moving less. Both amps were tuned to 47.9 @ 1ohm on a 50hz tone, 3/4 HU vol. Not sure what the deal is, but I just brought the gain up on the one amp til I can try something different with my rca setup. On the aq amps there isn't a line out to daisy chain, correct me if I'm wrong. I'm wondering if I can get a single input rca and daisy chain the inputs through the single rca on the right in the pic. The booklet that came with the amp doesn't mention this, only when strapping amplifier's. 2000 Blazer 4dr -24" Boss 330s -Lowered 2/3 -5000k Hids w Projector Retro -Candy tails -LED interior lighting -20% tint 35% windshield -Alpine 9886 HU -RF P1462 Dash -RF P1652 Front -RF P1652 Rear -Two 18" Fi BTLs -MB Quart Onyx 4.80 -Two Audioque AQ2200Ds -Xs Powerr D5100, 2 Powersafe G31s -Knukoncepts 1/0 wire -Mechman 270 Alt w Boost Module -10.4 Net @ 28hz 140sq.inch of port My Youtube Channel!!
Tebo Posted June 11, 2010 Report Posted June 11, 2010 why not bridge them? wouldnt that make like 2000w at 2 ohms? i dont know much about your system though. 04 dodge dakota ext cab 4x4 excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator
Carnag3 Posted June 11, 2010 Author Report Posted June 11, 2010 why not bridge them? wouldnt that make like 2000w at 2 ohms? i dont know much about your system though. What? 2000 Blazer 4dr -24" Boss 330s -Lowered 2/3 -5000k Hids w Projector Retro -Candy tails -LED interior lighting -20% tint 35% windshield -Alpine 9886 HU -RF P1462 Dash -RF P1652 Front -RF P1652 Rear -Two 18" Fi BTLs -MB Quart Onyx 4.80 -Two Audioque AQ2200Ds -Xs Powerr D5100, 2 Powersafe G31s -Knukoncepts 1/0 wire -Mechman 270 Alt w Boost Module -10.4 Net @ 28hz 140sq.inch of port My Youtube Channel!!
tristan560 Posted June 11, 2010 Report Posted June 11, 2010 Ugh....ummm....if I remember correctly. You just run rcas into master amp as usual, then just one rca to one input on the slave amp. Make sure the switches are set accordingly. <u>99 Jimmy SLT 4WD</u> Systemless. <u>99 Grand Prix GTP</u> DC XL 12 on 1.5k tuned lowwwwww.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.