Dan2427 Posted January 22, 2011 Report Share Posted January 22, 2011 How much port area are you running? I have a close to the same set up in a 98 grand cherokee. What was the frequency you hit the 148.3 with? I'm hoping my taxes come back soon so I can buy another AQ3500 and alternator. I havent metered yet and wont til spring but you gave me hopes on 50s!!! Clean install. A gasket is like 10 or 15 bucks I bought new ones for my woofers. 2003 GMC Yukon Denali Alpine CDA 117 Redoing Mids/Highs 4 Runs of 1/0 Knukonceptz 2+, 2- 4 Deka 9A31's in back (Stock underhood) 250 amp Alt. AQ20K 2 18" Crossfire XS V.2's 12 cubes 33hz 149sq inches of port! Link to comment Share on other sites More sharing options...
Freshman6969 Posted January 23, 2011 Author Report Share Posted January 23, 2011 Nice, install sorry I'm on a phone, but do u have the link? thanks man How much port area are you running? I have a close to the same set up in a 98 grand cherokee. What was the frequency you hit the 148.3 with? I'm hoping my taxes come back soon so I can buy another AQ3500 and alternator. I havent metered yet and wont til spring but you gave me hopes on 50s!!! Clean install. A gasket is like 10 or 15 bucks I bought new ones for my woofers. honestly, i have not a clue off the top of my head, i dident design the box, a fellow team member did for me, i have the box calc somewhere, and it could be cleaner lol alot of the wires are just thrown in there since its been to cold to do much, plus im outta terminals and have to solder the rest of them other then crimping them, but thanks man, and good luck on your 150! i prob could break it if i had the cash to get a new alt :/ edit: 56^2 inchs of port i believe Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
evermaxx Posted January 23, 2011 Report Share Posted January 23, 2011 hows your voltage ? Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
Freshman6969 Posted January 23, 2011 Author Report Share Posted January 23, 2011 hows your voltage ? sits around 14.0-14.5 drops to around 13.8 occasionally, full tilt i havent seen it drop below 12.4 wile revving to 2k rpm, pretty good stock alt i must say lol! Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
EricM9104 Posted January 23, 2011 Report Share Posted January 23, 2011 Could possibly gain a little more with a bigger port.. 2015 Honda Civic LX 4dr | 24k miles Stock H/U and mids/highs Power Acoustik GW3-12" D2 Sub HiFonics BXX1200.1D @ 1ohm Random 2.5^3' dual ported box NVX LOC Stinger wiring throughout 1977 Chevy SWB Cammed 350 Dual exhaust Cheap Wish stereo Link to comment Share on other sites More sharing options...
Freshman6969 Posted January 23, 2011 Author Report Share Posted January 23, 2011 Could possibly gain a little more with a bigger port.. that too lol, but ill save that for awile Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
siccostyle Posted January 25, 2011 Report Share Posted January 25, 2011 Nice numbers this build has come along way. Get a job so it can go further. :good: 01 2dr ExploderBuild log2 18" DC Level 6's (M3's)DC 10k5 XS d3100's, DC 390 alt100' shok ofc cable Team ShokTEAM SUB SONIC ADDICTION Link to comment Share on other sites More sharing options...
Freshman6969 Posted January 25, 2011 Author Report Share Posted January 25, 2011 Nice numbers this build has come along way. Get a job so it can go further. :good: Thanks man, and yeah it has, im pretty proud lol, and shit tell me about it Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
Dan2427 Posted January 25, 2011 Report Share Posted January 25, 2011 My stock alt on my grand cherokee is pretty wicked to but I only drop to 13.5 at .5 ohm while revving to 2k also. Idling is not good at all. When my taxes come back I'll be buyin a DC Power alt and another AQ3500 possibly! Then I will post pics and vids of my build I need deadener badly! 2003 GMC Yukon Denali Alpine CDA 117 Redoing Mids/Highs 4 Runs of 1/0 Knukonceptz 2+, 2- 4 Deka 9A31's in back (Stock underhood) 250 amp Alt. AQ20K 2 18" Crossfire XS V.2's 12 cubes 33hz 149sq inches of port! Link to comment Share on other sites More sharing options...
Freshman6969 Posted January 25, 2011 Author Report Share Posted January 25, 2011 My stock alt on my grand cherokee is pretty wicked to but I only drop to 13.5 at .5 ohm while revving to 2k also. Idling is not good at all. When my taxes come back I'll be buyin a DC Power alt and another AQ3500 possibly! Then I will post pics and vids of my build I need deadener badly! what years your cherokee? and shit i hope i get something decent when i get my taxes back lol, but the stock alt on mines 136amps, i dont seem to get to much voltage drop since i got an extra batt in the back but the low notes drop it low lol Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.