Noobie Enclosure help

[ny4rick]

There´s something called impedance rise wich is a bitch!!! Also, voltage drops, so after you start with 1000 watts you´ll see 500 watts at the most if you are a "noob" as you claim you are, wich i don´t think by the way!!! You have small power and that allows you to build a much bigger box, 1.6 per sub is kind of a burp box with tons of power haha.

Like orion said, i would get 10 cubic feet after displacement, subs up/port back with a 35 hz tuning, that should play very nice lows

[ny4rick]

ok, 10 cubic feet. But what size ports? one chamber or 4? and add 2 more 1000/1 or not?

[OrionStang]

I say one chamber, add the amps, and measure how much space you have (h,d,w) so we can help design the box.

[fecupe2001]

common chamber, i would just sell those amps and buy a single one for the subs, much easier to fit on any space, less wires, etc etc, i would get 2 8" aeroports for that box

[OrionStang]

8" Aero ports, good call.

[ny4rick]

common chamber, i would just sell those amps and buy a single one for the subs, much easier to fit on any space, less wires, etc etc, i would get 2 8" aeroports for that box

[ny4rick]

I can do 38" high (max), 50" wide(max) and the depth is as deep as I want

[fecupe2001]

8" Aero ports, good call.

Thank you, glad we are on the same path

I can do 38" high (max), 50" wide(max) and the depth is as deep as I want

Damn, that´s big!!! Well, recommending something very fast because i have to go, i would get 19" H x 48W x 28D with 2 Aeroports about 13" long, that would give you around 10 cubic feet after displacement with a 35 hz tuning, this is using 1" thick MDF...

[OrionStang]

You can use the same as measurements Fecupe said with .75" mdf and a double baffle.

[ny4rick]

Thank you, glad we are on the same path

Damn, that´s big!!! Well, recommending something very fast because i have to go, i would get 19" H x 48W x 28D with 2 Aeroports about 13" long, that would give you around 10 cubic feet after displacement with a 35 hz tuning, this is using 1" thick MDF...