memphisbasshead Posted August 13, 2010 Report Share Posted August 13, 2010 (edited) okay i don't have a table saw and i tried to do it with a circular saw and i epically failed can someone make me four 48 inch 45 degree cuts out of 3/4 mdf or 3/4 plywood doesn't matter. i'll pay $20-30 shipped. EDIT: each angle needs to be 2 inches Edited August 13, 2010 by memphisbasshead Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
Soapbox Posted August 13, 2010 Report Share Posted August 13, 2010 Where are you located I'll cut them for free if your near me. Quote TEAM FLEX ISSUES, TEAM DC AUDIO 2010 California State Finals Champion MECA AS2 2011 California State Champion Meca S2 2011 California State Record holder Meca S2 2012 Meca Mod 4 class 152.5 and rising Link to comment Share on other sites More sharing options...
memphisbasshead Posted August 13, 2010 Author Report Share Posted August 13, 2010 memphis,tn i'll drive about 150-225 miles to get em Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
memphisbasshead Posted August 14, 2010 Author Report Share Posted August 14, 2010 bump Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
fritosaregood Posted August 16, 2010 Report Share Posted August 16, 2010 does your circular saw blade tilt? im sure it does, just tilt the blade. and run it down the board with another board clamped on top to guide it. it will be alot cheaper, and the boards will most likely get damaged in shipping too. Quote seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
Integra_boomer Posted August 16, 2010 Report Share Posted August 16, 2010 wow.. im sure there is somebody near you who can do this. Quote 1995 Integra GSR (DB8) Pioneer 3200-DVD 6.5 rockford fosgate 2-way fronts 6.5 rockford fosgate 3-way rear saz-3000D (2) 12" SA-12s Link to comment Share on other sites More sharing options...
memphisbasshead Posted August 16, 2010 Author Report Share Posted August 16, 2010 does your circular saw blade tilt? im sure it does, just tilt the blade. and run it down the board with another board clamped on top to guide it. it will be alot cheaper, and the boards will most likely get damaged in shipping too. i already tried that Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
fritosaregood Posted August 16, 2010 Report Share Posted August 16, 2010 i already tried that what went wrong? Quote seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
97SSBlazer Posted August 16, 2010 Report Share Posted August 16, 2010 what went wrong? X2. I use a clamp and circular saw all the time?? Quote lower tuning is just hard. I was surprised how loud 145 sounds at 35hz, and how quiet 145 sounds at 50hz. -= 2005 Tahoe LT =-Head unit: Pioneer AVH-X5500BHSSource: iPad Mini in dash Subs: 2 T1 12's Sub Amp: T1500-1bdCPWire: Rockford Fosgate 1/0 awgSignal Cable: MonsterFronts:Stock Bose for now:)Rears: Stock Bose for now:)MIds/High amp: Stock Bose for now:) 2005 Tahoe Build Log: http://www.stevemeadedesigns.com/board/topic/172529-2005-tahoe-my-17th-vehicle/ 2001 Monte Build Log: http://www.stevemeadedesigns.com/board/topic/160030-2001-monte-carlo-my-16th-car-lol/page-2#entry25309381997 Tahoe Build Log: http://www.stevemead...oe-6-15-rf-15s/2001 Impala Build Log: http://www.stevemead...katzkin-inside/ Link to comment Share on other sites More sharing options...
memphisbasshead Posted August 16, 2010 Author Report Share Posted August 16, 2010 what went wrong? apparently the circular saw i have is a complete pos cause when i turned it at an angle the thing came undone and i got the shit scared out of me cause i almost cut my arm off and yeah i guess i'll go and see if someone lives nearby that can do it for me Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.