I have a 97 civic that is obd2 wiring. well anyways it came stock with a d16y8. I bought a complete b16 swap which of course i dont expect everything to be there. but the guy threw in two obd1 vtec ecus and said they would plug right in. and i knew it couldnt be that easy. sure enough they didnt. so i would either need a obd2 to obd1 conversion harness or just get the obd2 ecu correct? but even after that how would i get the vtec part of it to work?
I have just started running the sundown sa-12s a daily on a 3000d and boy do they get down! but when i go for more than a minute or so they will start to heat up and il start smelling the coils.. not to mention today my friend and i heard the coil hit the magnet a few times. And ik im not even seeing 3k. Would spl coils help with the demos? or should i just upgrade to a z series woofer or nightshades?
i reconed mine with copper and they are perfect for daily i had 2 12s that took over 3k all day. And you can still compete it just depends how serious you are.
I have 2 D4 sundown SA-12s sealed of from the trunk firing inside the cab.they are wired 2 ohms a piece on the inside. then you can series for 4 or 1 on the outside of the box. Anyways I have not ordered my amp yet so yesterday we tried it on a kicker 1500.1 @ 4ohms and it was not very loud. The sq was extremly good! But something wasnt right. We looked back and one woofer was moving alot more than the other. Everything reads out good on the voltmeter too. when i push on them one is stiffer than the other. should i just switch them around? and what could be the problem to it not being very loud? Do the SA's really need a stupid amount of power to be loud? any opinions on this will be greatly appreciated. Thanks
ya the speakers cut in and out and then just stop completely. headunit is still on.. did some testing and when i roll my two back windows up it stops.. when theyre down it starts cutting out again. wtf? it wont do it at all if im going below 40 though.
love how u guys soon decided i disregarded your opinions.. I have been listening and looking into what was said. why do you think i said the pins were NOT coming loose.. must mean i obviously tried it! anyways im going to check the ground and power wires tomorrow.