TLEJ Posted August 18, 2010 Author Report Posted August 18, 2010 1000RMS for 2 12"s. The amp is 1000rms @ 2ohms, 1350w@ 1 ohm Quote
dugee81 Posted August 18, 2010 Report Posted August 18, 2010 1000RMS for 2 12"s. The amp is 1000rms @ 2ohms, 1350w@ 1 ohm so to figure this out, you take the total wattage * ohm load, then find the square root of that. 1000 * 1 = 1000 the square root of 1000 = 31.62. you could wire down to 1 ohm and using a DMM, set the gain to 31.62 volts AC Quote 200a alt. by Excessive Amperage hc800 under hood & 2 Deka 9a31 in rear 1/0awg + big 3 SAZ 3000D HDC3 18" @ 2 ohm
Cashdollar2009 Posted August 18, 2010 Report Posted August 18, 2010 I know how to set them not to clip with a DMM.. but how do I do the wattage? Just keep the voltage down to what it matches to? How do you know how to do that, but not voltage? Quote On 6/30/2011 at 1:11 AM, 'Ray' said: Acoustical energy is free. Electrical energy is not.
UnderLoK Posted August 18, 2010 Report Posted August 18, 2010 How do you know how to do that, but not voltage? More than likely the same way people think using a DMM stops clipping... Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts
TLEJ Posted August 18, 2010 Author Report Posted August 18, 2010 Nah, I know it's not COMPLETELY accurate and all.. The only true way is with an oscope and all. And because I was told my voltage limits, I didn't know about the big chart thing until just a while ago. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.