NcHalfrican Posted August 19, 2010 Report Share Posted August 19, 2010 I'm taking apart my hifonics hfi12 and the screws holding the motor to the frame are glued...how can I get them out? Quote Link to comment Share on other sites More sharing options...
infinity Posted August 19, 2010 Report Share Posted August 19, 2010 Ok..... try this 1.Get a hammer and what ever screwdriver your using 2. Put the screw driver in the screw 3. Then get the hammer and tap the top of the screw driver a few times (Mid-power) 4. Then quickly turn Should work. Quote Link to comment Share on other sites More sharing options...
onelivinlarge Posted August 19, 2010 Report Share Posted August 19, 2010 heat the glue up? Quote 1) lookj to left 2) NOTICE BLKUE 3) ME > Y9OU 4) that is all Link to comment Share on other sites More sharing options...
Chris from Mi Posted August 19, 2010 Report Share Posted August 19, 2010 as mentioned above, hammer the butt end of the screwdriver but while simultaneously trying to unscrew the screw Quote Orion 2500D, Jbl Gto 75.4 Team Wolfpack Audio FSQ 15" d2, mb quart xover, tweets peerless 6.5 mids Alpine cda-105 optima up front Knu klm 1/0 Link to comment Share on other sites More sharing options...
NcHalfrican Posted August 19, 2010 Author Report Share Posted August 19, 2010 ok, gonna go try. thanks Quote Link to comment Share on other sites More sharing options...
NcHalfrican Posted August 19, 2010 Author Report Share Posted August 19, 2010 hammer trick didn't work but I stuck my soldering iron on it for 10 min and it came out with ease :] Quote Link to comment Share on other sites More sharing options...
Tek Posted August 19, 2010 Report Share Posted August 19, 2010 Pics! Why r u takin it apart? Quote Link to comment Share on other sites More sharing options...
moetpoppin Posted August 19, 2010 Report Share Posted August 19, 2010 sounds like a good idea man probably better than hitting the thing with a hammer haha STOP. HAMMER TIME ty Quote TY Moet poppin', hoe hoppin', aint no stoppin' B.I.G. poppa, I'm a bad boy Party and Bullshit - The Notorious B.I.G. Honest estimate on this truck when it's all done........... 172.3........... Ehh.. U are aware of what 172.3 is, right? yep..... Two Pyle 15"s Build log Link to comment Share on other sites More sharing options...
NcHalfrican Posted August 19, 2010 Author Report Share Posted August 19, 2010 Plan on trying to build one soon and thought it would be good practice...actually just stripped a screw haha! *puts on shiney pants* Quote Link to comment Share on other sites More sharing options...
mbdblue Posted August 19, 2010 Report Share Posted August 19, 2010 next time you could use an impact driver. its basically whats been described (a big screwdriver) except its designed to turn when hit at the ass end with the hammer. turns with as much as 200 ft.lb of torque. there not that expensive either, around 20-25 bucks from home depot. Quote AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.