CJ18 Posted September 5, 2010 Report Posted September 5, 2010 What is the best material and thickness to use to make a set of BUSS BARS? If anyone has a link to a supplier for material can you please post it.
Alex K Posted September 5, 2010 Report Posted September 5, 2010 home depot has like 1 inch by like 36 in aluminum bars. 2006 Nissan Z Track. My Feedback Thread i used to think a band pass was something you were around your neck or something.
mikeg321 Posted September 5, 2010 Report Posted September 5, 2010 Best material- copper. I use 1/4x2" might be a little overkill tho. Try to find some place locally, I got a 1/4x2x12" bar locally for less than what the cheapest site I found on the net was selling a 1/4x1x12 bar. 4 fully loaded Fi sp4 15's 2 Crescendo bc5500s Crescendo c1100.4 6 focal mids Vifa tweets 5 XS Power d3100's Pioneer avh-p4200dvd All crammed into a mustang. http://www.stevemeadedesigns.com/board/topic/150569-mikeg321s-fi-nendo-mustang-getting-walled-videos-page-4/
AA98hoe Posted September 5, 2010 Report Posted September 5, 2010 I use 3/8 by 2 1/2 alumuninum bar stock from a local farm equipment supply house named jm milano. it comes in up to ten ft lengths and i just have them cut it for me to my desired length. for a 60 inch piece i paid like 22 bucks works great. TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.