chapo123 Posted September 6, 2010 Report Share Posted September 6, 2010 well i have a trunk car, and can put up to a 5 cube box in there. i heard to put them in 1.75 per sub, which i can do. so i was thinking 1.75 per sub tuned to 33hz with a slot port. subs in one chamber and port to side. i have a autotek 1900 and i would wire at 1 ohm (dual 4s) and that amp supposibly does rated at 14.4v but i rest at 13.5 and drop down to 12.9-13.1 at full tilt. so im prob gonna set gain to 1800rms at 1 ohm (with dmm) and after rise and volt drop it should be close to sub rms, atleast not to much over powering. i heard these subs are beasts lol but what would you reccomend? iwant to kill the lows. Quote Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal? heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked. i dont want woofer broke like bass sound clip clip and voice coil overheat 2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604 Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted September 6, 2010 Report Share Posted September 6, 2010 well i have a trunk car, and can put up to a 5 cube box in there. i heard to put them in 1.75 per sub, which i can do. so i was thinking 1.75 per sub tuned to 33hz with a slot port. subs in one chamber and port to side. i have a autotek 1900 and i would wire at 1 ohm (dual 4s) and that amp supposibly does rated at 14.4v but i rest at 13.5 and drop down to 12.9-13.1 at full tilt. so im prob gonna set gain to 1800rms at 1 ohm (with dmm) and after rise and volt drop it should be close to sub rms, atleast not to much over powering. i heard these subs are beasts lol but what would you reccomend? iwant to kill the lows. thats perfect Quote Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
chapo123 Posted September 6, 2010 Author Report Share Posted September 6, 2010 i heard they like 2.25 if its right at 600rms? Quote Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal? heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked. i dont want woofer broke like bass sound clip clip and voice coil overheat 2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604 Link to comment Share on other sites More sharing options...
JPagan Posted September 6, 2010 Report Share Posted September 6, 2010 (edited) i heard they like 2.25 if its right at 600rms? I wouldn't make it that big 1.5-1.75 per sub ftw Edited September 6, 2010 by JPagan Quote Link to comment Share on other sites More sharing options...
chapo123 Posted September 6, 2010 Author Report Share Posted September 6, 2010 1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz * Tune higher for more SPL oriented setup * enclosure can be as big as 2.25 ft^3 if you stick with the 600 RMS rating quoted off this site http://www.diymobileaudio.com/forum/diyma-vendors/58437-sundown-sa-12-d4-pre-sale-$175-down-qty.html Quote Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal? heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked. i dont want woofer broke like bass sound clip clip and voice coil overheat 2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604 Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted September 6, 2010 Report Share Posted September 6, 2010 I wouldn't make it that big 1.5-1.75 per sub ftw this. dont do anymore than 1.75 per sub Quote Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted September 6, 2010 Report Share Posted September 6, 2010 1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz * Tune higher for more SPL oriented setup * enclosure can be as big as 2.25 ft^3 if you stick with the 600 RMS rating quoted off this site http://www.diymobileaudio.com/forum/diyma-vendors/58437-sundown-sa-12-d4-pre-sale-$175-down-qty.html you will see better results with 1.75, the 2.25 is the absolute MAX Quote Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
chapo123 Posted September 6, 2010 Author Report Share Posted September 6, 2010 you will see better results with 1.75, the 2.25 is the absolute MAX i was going to do 2cu each but the guy im getting subs from said 1.75 would be best just wanted other opinons Quote Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal? heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked. i dont want woofer broke like bass sound clip clip and voice coil overheat 2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604 Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted September 6, 2010 Report Share Posted September 6, 2010 i was going to do 2cu each but the guy im getting subs from said 1.75 would be best just wanted other opinons he's correct. Quote Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
chapo123 Posted September 6, 2010 Author Report Share Posted September 6, 2010 alright thanks Quote Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal? heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked. i dont want woofer broke like bass sound clip clip and voice coil overheat 2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.