UnderLoK Posted October 9, 2010 Report Share Posted October 9, 2010 (edited) Couple people had asked for video's of the subs so I took this on the way to get Tubby's to feed this POFS cold I have... Bottle trick too, but um, yea it's my first one so don't expect too much In my cold driven haze I forgot to turn the subs up on the HU, was at -6 which I noticed when I started the next video (which is above). Oh and don't mind the voltage, it doesn't stay there long, just at start (the meter is off .3-.4 volts on the low side that's actually 15.7). Edited October 9, 2010 by UnderLoK Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
may03LT Posted October 9, 2010 Report Share Posted October 9, 2010 Right on man. I think I asked you this before but is the electrical doing ok now? Quote Link to comment Share on other sites More sharing options...
UnderLoK Posted October 9, 2010 Author Report Share Posted October 9, 2010 (edited) Right on man. I think I asked you this before but is the electrical doing ok now? Yea man it's pretty sick. I'm glad Aaron talked me into going overboard. I'll never have to worry about it again There are a couple small things I have to sort out sooner or later, but its long term stuff. I'm still not sure about the inductive pickup, I really want to incorporate it, but, meh, such a PITA. Maybe I'll find one at a junk yard and mod it. Shit I even have rear fusing now (never posted that) lol Edited October 9, 2010 by UnderLoK Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
AA98hoe Posted October 9, 2010 Report Share Posted October 9, 2010 (edited) Be nice to see that boiler dude post some vids up too. maybe a full can of soda float trick :drink40:and not tryin to thread jump underlok your setup is sick Edited October 9, 2010 by dc98hoe Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
UnderLoK Posted October 9, 2010 Author Report Share Posted October 9, 2010 Be nice to see that boiler dude post some vids up too. maybe a full can of soda float trick :drink40:and not tryin to thread jump underlok your setup is sick No way man bust his balls all you want... x127 I wanna see him float some D cups Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
AA98hoe Posted October 10, 2010 Report Share Posted October 10, 2010 underlok what amperage iraggi did you have and how much of a difference is it now? im thinkn of doing the same thing. Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
UnderLoK Posted October 10, 2010 Author Report Share Posted October 10, 2010 (edited) underlok what amperage iraggi did you have and how much of a difference is it now? im thinkn of doing the same thing. I had dual 300a Iraggi's. Their idle amps were close to Mechman (within 20a), but since my pulleys were to small I was actually getting close to full output at idle. Mechman completely rebuilt my 4 plug Iraggi for far less than a new one. The 2 plug was working fine, but it blew up so I bought a new 2 plug based on an AD244 from Mechman and sent my Iraggi in to be fixed (for the 3rd time). I have it back and need to sell it one of these days. The long and the short of it. Matthew from Mechman rocks, he will answer any questions that you have because that is his position with the company. To take care of customers, unlike Dom who did it all himself which obviously took a toll because now he is MIA. That fucker still fucking owes me over $200 not including all the money I had to spend to get my one alt fixed, shipping 4 times, etc. Going with Iraggi literally cost me hundreds upon hundreds of dollars. $200+ on shipping alone (3 dead alts) 3 belts ($99) $200 on a bracket that didn't fit that he never refunded me for $225'ish to get my one alt repaired and the list goes on... Hopefully I can at least recoup $300 of that from selling this 2 plug. Hands down the worst experience I have ever had. Edited October 10, 2010 by UnderLoK Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
AA98hoe Posted October 10, 2010 Report Share Posted October 10, 2010 yea ive sent 1 of my 220s back 3 times. now one of my 280s took a shit and i just pulled them out today. im going with dom cause when his product works it works. i talked to him last nite( through texts) and he is kool with me,said he will rewind for free. yea hes mia for most but i guess im the lucky one. i cant afford new alternators at this moment, and im preety sure the rewind to 220s will help me in the lanes. thanx bro Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
Twistedchild420 Posted October 11, 2010 Report Share Posted October 11, 2010 Them there woofers is gettin it! Very nice! Quote My POS Bass machine-2003 Hyundai Santa Fe on some shitty 22'sBed Liner Paint Job-Pioneer AVH 3200DVD4 DAD BD series 15's in a 4th Order (Bassheads ENT Design)4 Arc Audio XDI2000.1 for the woofers6 Cadence CVL68MBX 6.5's-Cadence CVL88MBX 8's-6 Cadence XT20 Supertweeters2 Arc Audio KS300.4's for mids and tweets1 Arc Audio ALD 10v Line DriverAll Audiotechnix Power wire1 DC Power 270XP High Output Alternator1 XS Power D3400 up front....6 XS Power D3100's in the rearAir Lift 1000 Bags in rear to help with suspensionIf your still reading this GFY....... Link to comment Share on other sites More sharing options...
UnderLoK Posted October 11, 2010 Author Report Share Posted October 11, 2010 Them there woofers is gettin it! Very nice! Thanks man! What happened to you running woofer(s) anyways? Slacker! Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.