skittlesRgood Posted October 14, 2010 Report Share Posted October 14, 2010 if you have a grinder, use a flap disk. itll be 10x faster than that wire wheel Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
Team Bassick - Kimo Posted October 14, 2010 Report Share Posted October 14, 2010 Skittle speak it the truth, if Alpine saw this thread he would "LMFAO". I've seen Alpine recone speakers in 15 minutes. NO Bull shit. If you don't have an electric grinder try to borrow or rent one and purchase the flap disk. DON'T FORGET TO MASK/TAPE OFF THE POLE PIECE SO NO CRAP GETS IN THERE!!!! Quote KIMO @teambassick http://www.teambassick.com Link to comment Share on other sites More sharing options...
dj00140 Posted October 14, 2010 Author Report Share Posted October 14, 2010 Skittle speak it the truth, if Alpine saw this thread he would "LMFAO". I've seen Alpine recone speakers in 15 minutes. NO Bull shit. If you don't have an electric grinder try to borrow or rent one and purchase the flap disk. DON'T FORGET TO MASK/TAPE OFF THE POLE PIECE SO NO CRAP GETS IN THERE!!!! Ya well did he do his first recone in 15 minutes? with no help? I doubt it... Quote 2010-11 Project: 1 15" DC XL 1 AP3k 1 3.5 cube interchangeable port box Finishing this all up over the winter and will be starting to compete in 2011! 651 - 612 Link to comment Share on other sites More sharing options...
TorK102 Posted October 15, 2010 Report Share Posted October 15, 2010 Yeah I doubt it too. I'm reconing my dc now, or at least cleaning all of the crap off for the recone Quote My bass is louder than your mom... DC Level 4 15" with Level XL soft parts Planet Audio BB2400.1 Pioneer DEH-6000UB Head Unit 950 amp Kinetic Battery Link to comment Share on other sites More sharing options...
skittlesRgood Posted October 16, 2010 Report Share Posted October 16, 2010 Ya well did he do his first recone in 15 minutes? with no help? I doubt it... does that matter??? the point is that he could never do it that fast with that little wire wheel. use the right tools to do the job and we are telling you what the right tool is. plus, those wire wheels throw wires all over the place. Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
dj00140 Posted October 18, 2010 Author Report Share Posted October 18, 2010 Thanks for the advice guys, they gotta use different glue for the spider landing/ surrround landing cause the foam surround came clean with acetone, the spider landing I had to use a flat scraper and hammer then sanded by hand to get it about %60 bare metal but its completely smooth so it should work fine, I got pics but am just going to post them in my build log once I get my recone and box built... Quote 2010-11 Project: 1 15" DC XL 1 AP3k 1 3.5 cube interchangeable port box Finishing this all up over the winter and will be starting to compete in 2011! 651 - 612 Link to comment Share on other sites More sharing options...
Mendozauly Posted October 18, 2010 Report Share Posted October 18, 2010 Im doing my DC Audio Lvl 5 18" right now and i ended up using the sand paper roller piece on my dremal kit. This thing work's great, all the way down to bear metal! Tape off the mag and used air in a can to blow the basket. Waiting on my RE-cone's from DC, special thanks to Anna and Rusty for the great service. Quote Alpine D900 head unit 7" flip out t.v Kicker 6 1/2 components (front,rear)KS 6502 MB quart 3 1/2" in front A/C vent's (center channel) DC Audio LVL 5 18" (pair) Custom ported box Sundown 4500 at .5 Sundown 100.4 XS 3100 up front and a pair of XS 6500 in the rear. 1 17" Eiger Vision T.V 2 7" Eiger Vision T.V in Second row. Dynomat Top to Bottom (foam in all halo beam's) DC Eng Alt 260SP and a 400SP dual set up. big 3 Sitting on 24" If your neighbor don't complain it's not Loud! So you best go fix your shit !!!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
LoudNLow931 Posted October 20, 2010 Report Share Posted October 20, 2010 My dad took it to his work and hit it with a pencil grinder. Worked great Quote 2008 Dodge Ram 2500 6.7l Cummins 4 FT1s C1600.2 8 PWX 8s ONX2.100 Audio Technix Wiring & Sound Deadener My Youtube Feedback Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.