pstone11 Posted January 1, 2011 Author Report Posted January 1, 2011 Yesterday I made some baffles and some circles... Put two baffles in and got the last one(s) all cleaned up and countersunk and got them in too.. Took a while but I finally figured out the port situation.... Those pics are next. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
pstone11 Posted January 2, 2011 Author Report Posted January 2, 2011 I've built quite a few removable ports in my day, but this one is for sure one of a kind in my book. I'll post up the pics and let you all figure it out. Test fit: This is actually the view looking from the back - the face will be more different, go figure. The reason for the port being removable is two-fold. One, I like to be able to change the tuning if needed, especially since the entire port is external to the enclosure. Two, The subs can not be removed or installed with the port in place, so kind of necessity. Right now I'm sitting right around 29.09ish Hz. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
pstone11 Posted January 3, 2011 Author Report Posted January 3, 2011 Geez, tough crowd here at SMD these days. Triple baffles, removable port, some 18's, tuned below 30 Hz, pure Sausage...... Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
Ji553r Posted January 3, 2011 Report Posted January 3, 2011 you know damn well i been watching the top to see when this is updated! I don't fuck around. I go from zero to I hope you die in less than 2 posts build log http://www.stevemeadedesigns.com/board/topic/104524-new-subs-coming-sundown-3500d-arc-audio-cable-lacing-crescendo/
pstone11 Posted January 16, 2011 Author Report Posted January 16, 2011 Good day today - Subs loaded, built a trim panel for the port, it's finished and installed. Did some painting, ran some wires. Working out pretty well so far. I think I am going to pull the port back out and run a brace through the middle of it - I think that poor port is in for a beating... Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
IH8PunkRok Posted January 16, 2011 Report Posted January 16, 2011 awesome awesome awesome -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
00sdime00 Posted January 16, 2011 Report Posted January 16, 2011 Sick work as always, Pat. A half-wit gave you a piece of his mind, and you held on to it. My Youtube vids...enjoy anythings possible with the right build =] we accept visa and mastercard =]
Sanitarium Posted January 17, 2011 Report Posted January 17, 2011 I just had to read back through this whole log cause I forgot what the crap was going on. You take forever dude! Kidding. Looking good! we need vidyas!
pstone11 Posted January 17, 2011 Author Report Posted January 17, 2011 I just had to read back through this whole log cause I forgot what the crap was going on. You take forever dude! Kidding. Looking good! we need vidyas! Man, I know it.... It isn't supposed to snow like this on the NC coast. When it snows for a couple days, it ruins building time for at least a week - 10 days. It's done that twice already this year. Plus I work a good 50 hours a week and have a pair of crazy kids at home. I take build time when I can get it. Moving along though. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
pstone11 Posted January 18, 2011 Author Report Posted January 18, 2011 Yup, rained all day today. Crappy. Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.