95_1500 Posted November 21, 2010 Report Posted November 21, 2010 Throwing this up for my buddy nossined, helped him with this build a few weeks ago. I dont have any pics of the actual build but I think he has a few ill let him to throw up Out with the old In with the new - Took a trip up to NC yesterday to pick these up, thanks DJ Should have the trim pieces made and in this week.. Someones been slacking Just took a few quick vids after we got them in to see the difference from the alpines, will take some better daylight ones later Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
hdorre Posted November 21, 2010 Report Posted November 21, 2010 You need a LOT more port..lulz The build looks very nice..I wouldnt mount THOSE amps on the box though. They HATE vibrations On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
95_1500 Posted November 21, 2010 Author Report Posted November 21, 2010 You need a LOT more port..lulz The build looks very nice..I wouldnt mount THOSE amps on the box though. They HATE vibrations Thanks More port I agree with.. We worked with the room we had. It's surprised me so far for what it is, loves the lows. And THOSE amps need to be replaced.. Need to beef up the electrical first Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
hdorre Posted November 21, 2010 Report Posted November 21, 2010 Thanks More port I agree with.. We worked with the room we had. It's surprised me so far for what it is, loves the lows. And THOSE amps need to be replaced.. Need to beef up the electrical first I was being sarcastic with the port. It looks perfect. How big are the box and port? Yes, electrical always comes first, unless you play at low-moderate levels On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
95_1500 Posted November 21, 2010 Author Report Posted November 21, 2010 I was being sarcastic with the port. It looks perfect. How big are the box and port? Yes, electrical always comes first, unless you play at low-moderate levels For this I think it is perfect, i usually like to have the port on the larger side.. this ones a little small. Sadly I cant remember off hand but theyre on the plans at his house. I think around 7 cubes and the port is 10 x 8 or so. Supposedly around 34-35hz but it responds very well below 30. At full tilt theres some dimming but not too bad Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
dwright27 Posted November 21, 2010 Report Posted November 21, 2010 unless you play at low-moderate levels People do that??** 2006 F-150 4 DC XL M2 18's Walled Daily Driver XS Power 4 DC 3.5kw Team DC Team S.P.L. Lot of Audio Technix and 1/0 DC Audio Dealer American Bass Dealer XS Power Dealer Audio Technix Dealer
Socky Posted November 21, 2010 Report Posted November 21, 2010 Totally needs more power Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
nosinned Posted November 22, 2010 Report Posted November 22, 2010 I appreciate it Brett for putting those pictures up and all the help you gave me, Here is a few more. These were took with my phone so i apologize for the poor quality. I think we would of took a lot more pictures but it seemed any time we actually worked on it 10PM or later so it was always dark.. From design to putting the last of the Alpines in i think was less then 12hrs of Work. And Big thanks to DJ. I'm a lot more satisfied with replacing the Type R's 2001 Saturn SC2 4 Sundown SA 12's 2 Power Aucustik 2600BAMFs Jensen vm9313
nosinned Posted November 22, 2010 Report Posted November 22, 2010 Did some more testing today and hopeing to get the trim panels cut this weekend over the holiday to help seal off the back seat and below the platform we built. Its already moving alot of air and hope when i seal it i'll see a big improvement. My biggest concern besides the fact i need to find an alternator for my car.. is sealing my sun roof. Its just so loose atm opening and closing the doors causes it to pop up and its starting to leak when it rains.. I never use the thing. If anyone has some suggestions on sealing a sun roof please let me know! Hopeing with tax returns to get a new alt, a 3500d and an XS for the trunk dont know what size im going to need yet. 2001 Saturn SC2 4 Sundown SA 12's 2 Power Aucustik 2600BAMFs Jensen vm9313
fr34kout Posted November 22, 2010 Report Posted November 22, 2010 Lovin this build simply because I have a 95 SC1 lol. It's my beater though and I use it for work so I don't see any walls in the future for that car.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.