Tell Me If This Looks Good.(Google SketchUp)

[FreekDesignz]

Here is a sketch up of the box that im hoping to find subs for.

This is the Torres Box Calculator Data for it.

tell me what you guys think should be changed or what subs would fit nicely in it.

-Thanks

[FreekDesignz]

[mazdaspl]

Well after looking at both I have a few questions.. I noticed on the Sketchup design you have cutouts that look like it would be for some kicker 12's.. are these what your looking into? On the calculator, i noticed that you have the area marked for sub displacement as 1.9.. If you do have any subs yet this needs to be left blank until you decide on what subs you will be using. On the bracing, i dont see any in the box only the 45 angle pieces in each corner.. I recommend that you add some more on the baffle piece...You can use all thread to cut down on displacement of the bracing.... Hope this has helped ..

Jay

[Alex K]

really? you couldnt just fuckin upload it to photobucket or tinypic?

[FreekDesignz]

Well after looking at both I have a few questions.. I noticed on the Sketchup design you have cutouts that look like it would be for some kicker 12's.. are these what your looking into? On the calculator, i noticed that you have the area marked for sub displacement as 1.9.. If you do have any subs yet this needs to be left blank until you decide on what subs you will be using. On the bracing, i dont see any in the box only the 45 angle pieces in each corner.. I recommend that you add some more on the baffle piece...You can use all thread to cut down on displacement of the bracing.... Hope this has helped ..

Jay

I am not sure if im going with kickers, if i cant find some subs by feb and i have enough money i might go with DC LVL 4 12's or 15's. so when i know for sure what subs im getting i will then add to my final design. btw how did the port look that was another one of mt concerns. i know i probably dont know enough to build myself another box, but we all learn from experience, and im trying to keep the bad experiences to a minimum.

[n8ball2013]

really? you couldnt just fuckin upload it to photobucket or tinypic?

lol i was thinking the same thing.

[FreekDesignz]

really? you couldnt just fuckin upload it to photobucket or tinypic?

sorry my bad, i wanted to make sure that you guys didnt overlook anything. different people look at different things threw a different angle. ill remember that for next time.

[mazdaspl]

I am not sure if im going with kickers, if i cant find some subs by feb and i have enough money i might go with DC LVL 4 12's or 15's. so when i know for sure what subs im getting i will then add to my final design. btw how did the port look that was another one of mt concerns. i know i probably dont know enough to build myself another box, but we all learn from experience, and im trying to keep the bad experiences to a minimum.

I did forget to mention that on the port.. It looks good, the only thing i would change is try and make it 3inches from the back part of the wall.. That way you are equally dividing the 6inch center port...It also would not hurt you if you do decide on going with the DC subs to add a second baffle for mounting the subs..

[FreekDesignz]

I am not sure if im going with kickers, if i cant find some subs by feb and i have enough money i might go with DC LVL 4 12's or 15's. so when i know for sure what subs im getting i will then add to my final design. btw how did the port look that was another one of mt concerns. i know i probably dont know enough to build myself another box, but we all learn from experience, and im trying to keep the bad experiences to a minimum.

I did forget to mention that on the port.. It looks good, the only thing i would change is try and make it 3inches from the back part of the wall.. That way you are equally dividing the 6inch center port...It also would not hurt you if you do decide on going with the DC subs to add a second baffle for mounting the subs..

i was thinking about doing a second baffle for mounting the subs, then doing a third to make them sit flush.

[bromo]

Your sketch up design is made with .5" panels, while your calculator is .75". Also with a design like that I would calculate each side as its own slot port box using 3 of the box panels.