custom 4 12s box

[Fennygolf]

alright guys ive been waiting for this kid to make a 3d design and a cut out sheet for mdf baord for OVER 2 months and i cant wait any longer so im posting again i need help really bad audio comps are coming up and i need a box asap

4 diamond audio D1 12s

W - 3 feet

L - 3 feet

H - 8 inches

http://www.diamondau...manual-2008.pdf <---sub manual its the D112D2

tuning 32

port down the middle 2 subs to a side

subs pointing up

if u need anymore information message me

[Sinosic]

if you still need help email me at [email protected]

[skittlesRgood]

link didnt work but that box is going to be much too small. it comes to 1.5 cubes per sub before displacement of the wood, port and speakers. i dont see this box being any good with those limitations. can you make it taller?

[Fennygolf]

link didnt work but that box is going to be much too small. it comes to 1.5 cubes per sub before displacement of the wood, port and speakers. i dont see this box being any good with those limitations. can you make it taller?

i can give u 10 inches but the subs only need 1.05 cubic inches

[skittlesRgood]

link didnt work but that box is going to be much too small. it comes to 1.5 cubes per sub before displacement of the wood, port and speakers. i dont see this box being any good with those limitations. can you make it taller?

i can give u 10 inches but the subs only need 1.05 cubic inches

no, they need 1.75 cubes in a ported box. i just looked it up.

the internal airspace will be about 6.5 cubes, port and subs will take up somewhere around 1 cube. leaving you with 1.37 per sub. thats with no bracing or 45*s.

[Fennygolf]

link didnt work but that box is going to be much too small. it comes to 1.5 cubes per sub before displacement of the wood, port and speakers. i dont see this box being any good with those limitations. can you make it taller?

i can give u 10 inches but the subs only need 1.05 cubic inches

no, they need 1.75 cubes in a ported box. i just looked it up.

the internal airspace will be about 6.5 cubes, port and subs will take up somewhere around 1 cube. leaving you with 1.37 per sub. thats with no bracing or 45*s.

ok well i know that i cant go any wider then 3 feet and any higher then 11 inches i just took another measurement and i think i can make it 40 inches long it will be a tight fit but thats all i can give u

[Fennygolf]

alright guys ive crunched some numbers and have been stairing at my trunk for 4 hours in the snow thinking i got some NEW measurements that just might work try this one

height - 11 inches

weight - 36 inches

length - 41 inches

[EclipseChris]

Shoot my buddy BCPBaller64 a PM, theres a link to his profile in my sig. Guy is a pro and will do you up right!

[Fennygolf]

Shoot my buddy BCPBaller64 a PM, theres a link to his profile in my sig. Guy is a pro and will do you up right!

thats the kid ive been waiting for 2 and a half months

[fritosaregood]

Shoot my buddy BCPBaller64 a PM, theres a link to his profile in my sig. Guy is a pro and will do you up right!

thats the kid ive been waiting for 2 and a half months

why didnt you just use that time to learn how to design your own boxes?