bassHZ Posted December 7, 2010 Report Share Posted December 7, 2010 i like rustoleum but i hate the nasty tips it comes with so thats why i would use nightshades over it Link to comment Share on other sites More sharing options...
white4d96 Posted December 8, 2010 Report Share Posted December 8, 2010 I preferred rustoleum over the niteshades, I did my tails in VHT and my heads in rusto, and the tails have started to fade to red after only a few months. I also had to clear the niteshades to get a gloss from it. My rustoleum tint came out decently glossy for being suboptimal conditions. I applied it at 40*F, and it didn't work very well, I wouldn't do it under 60. Too many projects, too little time... Link to comment Share on other sites More sharing options...
Isabella Posted December 16, 2010 Report Share Posted December 16, 2010 Remove p4712.drv Errors The best way to remove p4712.drv errors and fix virus infection-related problems is to update the antivirus and antispyware software on your system and run a virus scan. Most of the antivirus software available today continually update their virus database and ensure that your system is free from any type of virus infection. Link to comment Share on other sites More sharing options...
Chally Posted December 16, 2010 Report Share Posted December 16, 2010 Remove p4712.drv Errors The best way to remove p4712.drv errors and fix virus infection-related problems is to update the antivirus and antispyware software on your system and run a virus scan. Most of the antivirus software available today continually update their virus database and ensure that your system is free from any type of virus infection. Link to comment Share on other sites More sharing options...
Z71 Thumper Posted January 4, 2011 Report Share Posted January 4, 2011 I used the niteshade and it turned out ok then started fading can I just use llumar tint for the tail lights <script language='JavaScript' src='http://www.rockfordfosgate.com/downloads/banner_link.asp?p_id=18'></script> Link to comment Share on other sites More sharing options...
Z71 Thumper Posted January 4, 2011 Report Share Posted January 4, 2011 . <script language='JavaScript' src='http://www.rockfordfosgate.com/downloads/banner_link.asp?p_id=18'></script> Link to comment Share on other sites More sharing options...
MileSwimmer4444 Posted January 4, 2011 Report Share Posted January 4, 2011 The vids I just put up in my build log shows my tail lights that I did with rustoleum 4 - 15 Sundown Z v.2 @ 35Hz 2 - AP3000D 2 - RF Power Punch 6.5 Comps 2 - RF Power Power 1 - Kinetic KHC2000 3 - Kinetic KHC2400 Iraggi 300A Knu Wiring Link to comment Share on other sites More sharing options...
TheBetterMethod Posted January 7, 2011 Report Share Posted January 7, 2011 Rustoleum has a blue tint to it, Niteshades has a purple tint to it. Niteshades finishes harder, more scratch resistant. Rustoleum finishes with a slight fog, not totally translucent. Both finish glossy if you apply them correctly. You'll be happier with the Niteshades, but both will fade out over time. 2005 Subaru Outback Wagon Pioneer 9400BH Fi Q 15, SAZ1500dV3 The first build>>> http://www.stevemead...-outback-build/ 140.9 @ 36hz Sealed on dash! REBUILT!!! 2 Fi Q 15s, 2 SAZ1500dv3 146.9 @ 39hz dBDRA certified Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.