Post your Air Ride Suspension

[mast240]

^^^^^ very sick bro!!!! you dont see many bagged minivans out there...

i'll post some pics of mine after the rebuild this weekend, but heres a list of what i've got

1999 montero sport

contitech 2500's up front and 2600's in rear (being changed to slam specialists)

ARP 1/2" air engine (FBSS)

VIAR 350c compressor (adding another one soon)

7 gallon tank

2 viar dual needle gauges and 10 switch box

[ChampN252]

First, that Bel-air is badass. When dropping a pick-up does it have to have that hump in the back like minitruck's? (nice truck btw) I would love full size pickup like a F150 or 1500 on airbags with a blowthru, but I starting to doubt that can be done now.

[mast240]

First, that Bel-air is badass. When dropping a pick-up does it have to have that hump in the back like minitruck's? (nice truck btw) I would love full size pickup like a F150 or 1500 on airbags with a blowthru, but I starting to doubt that can be done now.

if you want it to tuck the back wheels it does. you can do without it, and just drop the back end... but it wont be that low... maybe 4" lower than normal. but the reason for the tub job on the bed is in order to lay frame, you have to notch the frame... otherwise, your frame will end up laying on top of you axle, without that much of a drop.

as far as doing an f150 or 1500... its completely possible... it's already been done SOOOO many times, that it should be fairly easy to find parts for it

[sully]

First, that Bel-air is badass. When dropping a pick-up does it have to have that hump in the back like minitruck's? (nice truck btw) I would love full size pickup like a F150 or 1500 on airbags with a blowthru, but I starting to doubt that can be done now.

You don't have to cut into the bed but you will not be able to lay frame with large wheels if you don't. I raised the bed floor and added the notch and wheel wells to be able to lay body on 26's but with smaller wheels and not needing to lay frame it can easily be done. A mini notch and cutting away some of the inner wheel well will be sufficient for a basic setup.

Here is how my bed ended up:

[doug118]

OR do an underslung setup and have a full bed minus the wheel wells. Underslung means instead of having a c-notch, the frame is built under the axle to give you a really clean bed. the downfall is you can't get as much lift

[mast240]

^^^^^ bro... that frame is sick!! is that all stainless or chrome molly or some shit??

[lowrthnu92]

I so bad want to notch and body drop my excursion with the 30s! that's just too much for me right now. Maybe next winter I will lol

Do It !!!!!!!

hes on 26s

[teamSPB]

Heres some of the air ride on mine

[mast240]

here's a video of mine... even tho its already been posted... might as well post it on this thread ( call me a post whore all you want)

[BAGGEDBIRDS.com]

same old car

Slam 6" all 4 corners

2 gallon tank

SMC 3/8" valves

1 small compressor

3/8" line

its been bagged 10 years, same compressor, valves, and plastic air line.