bdubii Posted December 15, 2010 Report Share Posted December 15, 2010 here is my truck and the first box as a reference the old box was around 9.5ft^3 and tuned to around 35hz plans are to build a fiberglass box that is a little bit larger and tuned lower and also place the port up higher but still have the subs firing up so that i can hopefully pull off some hair tricks. Im not sure yet what i want to tune it to but im thinking around 27-30hz. any input would be appreciated pulled the old box out and the rear seats out here are the materials from lowes, wal mart, and uscomposites.com My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297 Link to comment Share on other sites More sharing options...
n8ball2013 Posted December 15, 2010 Report Share Posted December 15, 2010 gonna use an exorbitant amount of mat and resin products to do a full enclosure. but why. do a majority of it in mdf and then you can make the face or what not from fiberglass. look at boilermakers truck. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
bdubii Posted December 15, 2010 Author Report Share Posted December 15, 2010 yea, i should have made it more clear, only the top and bottom where the space under the seats used to be will be glassed. the rest will either be mdf or birch My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297 Link to comment Share on other sites More sharing options...
spl4life Posted December 15, 2010 Report Share Posted December 15, 2010 nice truck... im jealous... LoL... My first truck... My first Real build... *Update 8/9/10 DC Power 270xp Alt is In!!!* 1997 Toyota T-100 DC Level 5 18" in a T-line Everybody wants their system to be.... 1. Cheap 2. Reliable 3. Loud ...you can only pick two. micahmye hertz pack Link to comment Share on other sites More sharing options...
bdubii Posted December 15, 2010 Author Report Share Posted December 15, 2010 nice truck... im jealous... LoL... haha thanks, im still paying it off My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297 Link to comment Share on other sites More sharing options...
bdubii Posted December 15, 2010 Author Report Share Posted December 15, 2010 so after some more reading around i think i have decided to build a box that will be 10ft^3 after displacement and have three 6"x27" ports too equal 108in^2 of port area which is 10.8in^2/ft^3 and tuned to 27hz. also since the ports are so long i will have them firing up and the subs will still be firing up as well in the back of my ext cab truck any suggestions on this design? the main thing i am hoping to achieve are some hair tricks My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297 Link to comment Share on other sites More sharing options...
spl4life Posted December 15, 2010 Report Share Posted December 15, 2010 sub up port up... 27hz is too low in my oppinion... but thats cuz i got a wide range of music... if its hair tricks your looking for... lower is better...whatever floats your boat... lol My first truck... My first Real build... *Update 8/9/10 DC Power 270xp Alt is In!!!* 1997 Toyota T-100 DC Level 5 18" in a T-line Everybody wants their system to be.... 1. Cheap 2. Reliable 3. Loud ...you can only pick two. micahmye hertz pack Link to comment Share on other sites More sharing options...
bdubii Posted December 15, 2010 Author Report Share Posted December 15, 2010 thanks for your input. why do u think its too low? what would be some cons of having a box tuned lower? im just trying to learn here, so im not trying to be an ass or anything haha My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297 Link to comment Share on other sites More sharing options...
bdubii Posted December 16, 2010 Author Report Share Posted December 16, 2010 here are todays progress pics: i removed the jack mount and jb welded the holes and taped up the area under the rear seats. hopefully i can build the frame with birch tomorrow and start glassing My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297 Link to comment Share on other sites More sharing options...
bdubii Posted December 16, 2010 Author Report Share Posted December 16, 2010 My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.