OrionStang Posted December 30, 2010 Report Posted December 30, 2010 Anybody see a problem running everything on one amp. I was thinking an RF T-400.4 with my Punch 8's on the back channels and a high power component set on the front channels. Its either that or get a second T-400.2 for my components, I already have one for the midbass. Input and suggestions please. SMD Super Seller My Feedback Thread
FiNaLaLmAsY Posted December 30, 2010 Report Posted December 30, 2010 i personally like 4 channel amps only because long your HU has rear and front inputs because i like the imaging effect. it gives you. so i guess depends on what your trying to accomplish. 02 Nissan Sentra 4 DD 3500g 10's Crescendo Audio 3500 @ .5ohms Soundstream EGA4220 Fronts German Mestreo 6.5 Component Set 110Rms Rears RE XXX 6.5 Component Set 2ohms 220RMS 1 Dyralast Gold 1000Amp Battery 1 Vmax 2000amp Battery DC Power Inc 270XP Amp Alternator BIG 3 Upgraded All 1/0AWG Setup 8 1/0 Awg Runs
keepinitloud Posted December 30, 2010 Report Posted December 30, 2010 that will work 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1
finkster Posted December 30, 2010 Report Posted December 30, 2010 Yes I did this for a while. Ran a sundown e8 on 3-4 bridged and the comp set off 1-2. Sounded great. DAT 4125------>RE XXX comps active Eclipse cd7000 I serve drunks for a living
Recommended Posts
Archived
This topic is now archived and is closed to further replies.