Dj_Scarface Posted January 9, 2011 Report Share Posted January 9, 2011 This my full Bronco rebuild...I put in a small system with put together subs & amps. This system is just to hold me over till i got time to do all the body & paint at the same time...I started with the radio, I went with the Pioneer AVH-P6500. I got it for deal $40 at the junkyard cause the guy ain't no it was a TV radio till I went back for more part. I even sent it off to get it rebuild for $110-120.00Then I did the fronts with Infinity Reference speakers (Im gone use the Infinity speakers in the rebuild but Im gone put fatmat or second skin every where)I ordered the Pioneer AVH-P6500 brain off ebay so I could have am/fm radio & inputs for whatever I want hook up later Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Socky Posted January 9, 2011 Report Share Posted January 9, 2011 Looks like a good start. Keep it up Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 9, 2011 Author Report Share Posted January 9, 2011 Then I got some left over 0 gauge wire from my homie doge charger system build (gone redo it with stinger 0 gauge in the rebuild) Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 9, 2011 Author Report Share Posted January 9, 2011 Looks like a good start. Keep it up Thank homie bout to post the rest... I went to help a friend put a sound system in a party bus! Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 9, 2011 Author Report Share Posted January 9, 2011 The my rear speakers came in, they are Infinity Reference 6832CF Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Loudintha509 Posted January 9, 2011 Report Share Posted January 9, 2011 Slick junkyard find, and nice band aid I wish every body had beat so I wouldnt have to turn my shit down. Fosgate for life running there shit since I was 16 going on 15 years strong. Not stopping any time soon. Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 9, 2011 Author Report Share Posted January 9, 2011 The amps 1 old skool kick 2 ch. & 1 MTX 4 ch. Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Mtnbikecrazy55 Posted January 9, 2011 Report Share Posted January 9, 2011 Nice man, keep it up! I hate long signatures.... ...what the fuck is wrong wiht you you fucking fuckity fuck fuck head... Mtnbikecrazy55 Feedback Link to comment Share on other sites More sharing options...
korey_hofer Posted January 9, 2011 Report Share Posted January 9, 2011 I see a broken door handle I had to get some metal ones I found in the junk yard so they didn't break all the time previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street. Link to comment Share on other sites More sharing options...
Dj_Scarface Posted January 9, 2011 Author Report Share Posted January 9, 2011 Then RCA's 1 four channel set for the fronts/rears & 1 two channel set for the subs. Then I used some 9-wire to run speaker wire from the amps to back the dash just for now to run the front & rear speakers. (9-wire will be doors/kicks in rebuild) steve meade style... lol Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.