burzendowski Posted January 14, 2011 Author Report Share Posted January 14, 2011 theres going to be 2 ssx 100.b batterys per side of the truck in front of the wheel wells. i also have a nice python 5902p alarm with 3 sirens on the outside and 3 mini piezo sirens in the cab . i am also making my seats lock with a key so they can not be slid forward without unlocking them first. this way if someone gets inside the seats being in the way will slow them down. All the equipment will be bolted down with special screws and locking nuts , may even tac weld the nuts on the bolts. this is going to be a thief proof install. I Hate thieves..... Link to comment Share on other sites More sharing options...
Rebel4055 Posted January 14, 2011 Report Share Posted January 14, 2011 I would definitely tac weld the ends of the bolts. Rest In Peace mother. January 22, 1955 - February 14, 2013 http://www.stevemeadedesigns.com/board/user/35351-megrch/ Link to comment Share on other sites More sharing options...
burzendowski Posted January 14, 2011 Author Report Share Posted January 14, 2011 upon seeing the guts thats exactly what i said lol. it was bench tested to do 7400 at 11.9 at 1ohm. i will be running .5 for comp and 2 ohms daily. this truck will be competing in midwest spl Guts of amp look real similar to DD m4a Link to comment Share on other sites More sharing options...
burzendowski Posted January 14, 2011 Author Report Share Posted January 14, 2011 hell ya man!! im going to mount the amps flat on the floor of the truck behind the seats. i will run bolts thru the floor and a tac till make it very hard to remove. I would definitely tac weld the ends of the bolts. Link to comment Share on other sites More sharing options...
burzendowski Posted January 17, 2011 Author Report Share Posted January 17, 2011 Link to comment Share on other sites More sharing options...
cOmpressor Posted January 17, 2011 Report Share Posted January 17, 2011 Nice wood working man, very clean. Link to comment Share on other sites More sharing options...
Dan2427 Posted January 17, 2011 Report Share Posted January 17, 2011 I love blow-through builds! So sexy! Thats a beast amp, I want once for my DC's 2003 GMC Yukon Denali Alpine CDA 117 Redoing Mids/Highs 4 Runs of 1/0 Knukonceptz 2+, 2- 4 Deka 9A31's in back (Stock underhood) 250 amp Alt. AQ20K 2 18" Crossfire XS V.2's 12 cubes 33hz 149sq inches of port! Link to comment Share on other sites More sharing options...
lukaQ Posted January 17, 2011 Report Share Posted January 17, 2011 Guts of amp look real similar to DD m4a I would say the same Got carbon fiber dust cap??? Link to comment Share on other sites More sharing options...
heckvr4 Posted January 17, 2011 Report Share Posted January 17, 2011 very cool, what did you use to cut the metal? it takes balls to cut your cabin like that,, 05 f150 4 18'' DC lvl6 2 DC AUDIO 9.0ks 161.3 @ 44HZ build log here96 tahoe http://www.stevemeadedesigns.com/board/topic/160522-8-18xls2-dc-100k4th-order/page-9 Link to comment Share on other sites More sharing options...
burzendowski Posted January 17, 2011 Author Report Share Posted January 17, 2011 used a sawzaw and a air saw . going to seal up the box tomorrow . python alarm going in and system soon. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.