craniumcrackinbassv2 Posted January 24, 2011 Report Posted January 24, 2011 when doing the big three do the original connectors that go to the battery become obsolete? Quote
SQMonte Posted January 24, 2011 Report Posted January 24, 2011 everytime ive done it they have Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f
Slawsen Posted January 24, 2011 Report Posted January 24, 2011 when you do the big 3...the intention is to replace those wires, or so i hear.. Quote 00' Nissan Xterra Always under construction :] HU: Pioneer DEH3100-UB Mids & Highs: Kicker DS Component Set & Crescendo tweeters Mids & Highs Amp: Rockford 150.2 Subwoofer: 2 DC Audio LV 4 18"s Subwoofer Amp: Hifonics Brutus 2005d you been hanging out with jeff and dustin with that green paint? its yellow so it has to be loud.
craniumcrackinbassv2 Posted January 24, 2011 Author Report Posted January 24, 2011 everytime ive done it they have ok because im buying an xs battery as a primary and i have a pair of 0GA terminals that cover the entire battery terminal so i was wondering how is it possible to reconnect the original connections if the terminal is completely covered. i thought there was just more that went into recharging a primary battery than just a 0ga to the alt and another to a ground lol. Quote
SQMonte Posted January 24, 2011 Report Posted January 24, 2011 i always add on, except for the batt ground to chassis Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f
EclipseChris Posted January 24, 2011 Report Posted January 24, 2011 In most cases (like mine personally) you are REPLACING the original 3. But in some cases (like the ford focus) If you do not still have the stock terminals and wire the car wont start, so you must ADD onto, not replace. Quote i resolve to be a nicer moderator. Tercel build R.I.P. Eclipse build Old New V-Dub My feedback.
craniumcrackinbassv2 Posted January 24, 2011 Author Report Posted January 24, 2011 i always add on, except for the batt ground to chassis wait so you just have 1 0ga to the alt and the original battery ground? Quote
SQMonte Posted January 24, 2011 Report Posted January 24, 2011 Its pretty simple stuff Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f
craniumcrackinbassv2 Posted January 24, 2011 Author Report Posted January 24, 2011 ok hooooold on! from what i have learned the big 3 is 0ga to the alt another to the chassis and 1 more to the block of your motor.... Quote
dereileak Posted January 24, 2011 Report Posted January 24, 2011 just upgrade the wires, leave the stock stuff, even though I don't have stock grounds connected but I lost my cruise control around the same time, weird XD Quote 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.