Leaderboard
Popular Content
Showing content with the highest reputation on 03/09/18 in Posts
-
Got the battery box/amp rack done and painted. Will have 4 3500’s stacked on top of each other on top of the batteries, then 2 Q4.90’s on the wood facing the hatch. Got the amp rack yesterday. Will be cutting the port in the baffles soon, and once the baffles are mounted, the box will be all done, and just need to be sealed to the b pillar! also, got a whole bunch of SPL Cartel goodies that will be goin in. p.s. sorry for poor picture quality
2 points -
Looking good brotha!1 point
-
Still slowly getting there. Couple hours of work every day. Got the port all finished and glued together. Wires up the terminals, got both of the subs reconed, painted the outside. Got amp racks ordered and on their way. Should be just a couple more weeks till I’m playing!
1 point
-
Then built the platform over the batteries. Will stack 4 3500’s on top of the batteries. Then mount 2 4 channels to the front of the battery box.
1 point
-
got the battery platform built and batteries put in. 6 xp3000’s
1 point
-
Slowly making progress. Got the port sides in, and starting to lay down paint for port. Will finish assembling the port once I’m done painting it.
1 point
-
Small update. Got the shell all done. 45’s in all the corners and shrunk up the volume a bit to get 12 cubes after all displacements. Got all the port pieces cut. Just need to get wood filler tomorrow and then sand and paint the port before I install everything. Also got the baffles all cut and the sub cutouts cut. Slow but steady progress. Working on it at least 2 hours a day every day. Slowly getting there
1 point
-
Got another mechman 240a. Got it from a friend who said it had spiked in voltage so may need regulator replaced. But he said his alt plug was kinda janky, so it could have been that Talked to mechman and it would be only $42 + shipping to repair. So I bought it from him real cheap. Took to autozone, and it tested out good, and mechman said it should be good to run, so I put it in! Works great!
1 point
-
Finished the speaker pod today! Now I just need to run wires from the amp to the speakers and it will be done! Oh and also need to cut the center console to fit it in with the speaker pod there. Im going to wait until it is a little warmer than -10 outside to do that tho. So sick of this cold weather!
1 point
