white_boi_audio

LOL they need more powa ya think. I blew one so I replaced it so I turned my gain down so I couldn't give them a bad signal if thats what cause the last sub to blow. What kind of amps yall recommend 800 rms at 1 ohm. Also I forgot to say that when the last sub blew like I had two different friends put there hand on the surround when it was playing and I told them to stop, the day before it crapped out is when my friend did that. That could have caused the blowing of the sub or failure.

Well replaced my blown sub and took some videos. I have my gain on half so I don't give the new subs a clipped signal.

Dude that's messed up that whoever caused it ran. Got pussy's out in this world that won't take responsiblity's for there own actions. Sorry to hear about your friend hope everything will turn out ok and that they find the bastered that did that!

That shit was bad LOL yeah at first I was like where da bass and then here come that sexy ass bass knob it was like boom boom bam bam fnmjoafanfjdbndfafladf freakin ear shatering bass.

Daytime vids ftw

Yeah me to it was like IPS Driver error

Whats yall problem do yall like me that much you have to talk about me all the time. Actually the subs are 40 bucks for two subs they just priced them wrong LOL

what did you do get mad and bust your LCD don't be talkin behind my back bro

Thanks for that but it doesn't do what I need I can either get a 2 channel 2 ohm stereo stable or a mono 1 ohm stable amp. I need it to do atleast 800 watts rms

I need some more amp suggestions to do like 150 to 200 watss rms to each ten and a bass knob. The amp has to be 2 channel and 2 ohms stereo

they can't close before the time they have stated on there door and tehy can't kick you out until your done. If i came in 10 min before yall close and yall told me to leave 10 mins later I wouldn't leave. If i worked there I would have put the machine together to satify what the customer wants. Damn I need to get a job

yall didn't take any pictures?

dude that shit is bad as fuck in a good way. I love that box what kind is that the port is massage and it looks bad as fuck LOL

Nice Vid Thanks

The 4 10's on 400 watts would be louder huh? Ok then imma get this amp in like a week or two depending on my cash flow LOL I'm getting a good deal on it so I can't complain and its never been hooked up!!!

They need more power they are only getting like 60 watts to each do you know which would be louder the two ten's or the 4 ten's on the Audiobahn amp at 4 ohms

I thought so too, but when I get the amp if I decide to and get the money imma run it on the 4 ten's and see what they will do. Then I will go hook the old ten's if the other setup is lacking which I doubt it will.

OMG that was sexy as hell MEADE your doing it big Bro Freaking Big

I want a VIDEO of them sexy Shoes :) :lol: :D ;)

Are there anybody else that can tell me which would be louder cause I wan't to hear it from more then one person before I buy this amp. Just so you know I am not buying this brand new, well its never been hooked up, but I am getting a good deal on it.

Nice wheels mane you was just asking us what we thought would look good on the hoe in a different post and you went out and got the rims at the local shop. Sweet look sexy nuttin but rim

Ok I want some more Opinions or knowledge on which would be louder before I get this amp.

But see your not answering my question my amp I have is giving the subs what like 60 - 70 watts to each ten. I want to know if the Audiobahn would be louder on which setup the 4 ten's at 4 ohms or the two ten's at 4 ohm? :huh:

http://www.americanproaudio.com/vs-14xx.html Scroll down the page to VS-1405 vs-1405 TWO CHANNEL BRIDGEABLE AMPLIFIER MAXIMUM POWER OUTPUT 300W x 2CH (600W) @ 2 OHM POWER OUTPUT: 130Wx2CH (@ 2OHM) LESS THEN 0.3% THD 80Wx2CH (@ 4OHM) LESS THEN 0.1% THD MONO: 260Wx1CH (@ 4OHM) LESS THEN 0.3% THD ALL MEASUREMENTS DONE @ 14.4VDC, 1KHz INPUT SIGNAL FREQUENCY RESPONSE 20Hz-20KHz 2OHM CAPABLE IN STEREO MODE ONLY THIS MODEL IS EQUIPED WITH: LPF (LOW PASS FILTER) VARIABLE 50Hz-250Hz HPF (HIGH PASS FILTER) VARIABLE 2KHz-10KHz HIGH AND LOW ADJUSTABLE LEVEL INPUT MOSFET DC-DC SWITCHING POWER SUPPLY LED INDICATED POWER STATUS BUILT IN PROTECTION AGAINST SHORT CIRCUIT AND HIGH TEMP TRI-MODE SPEAKER CONNECTION READY BASS BOOST (+5dB @ 100Hz) AUTO POWER ON/OFF BY REMOTE (+12V) DIMENSION: 11 1/8 (W) x 1 7/8 (H) x 9 15/16 (L) Thats the specs on the page

http://www.crutchfield.com/S-Wjo8GYJEmnR/A...000T&tp=115 Go down to details and it says the RMS power