chewie

hell i tried blowin up my level 4 15 with level 5 coil and softparts and the spiders ripped and the coil wasnt even phased.

is that sexy ass carbon dustcap still available ?

to the guy in the video did he ever try flipping the box ? sub on meter side ports opposite. i found that to meter higher.

happy birthday bro.. and many more.

also.. before i tore it down for the recone. it was very beaten on and really loose. so i threw approx 3000 rms at it and it took it like a champ.. over 45 mins of playing beating the ever loving crap out of it.. bottoming out jumping gap you name it it was doin it.. well when i pulled it out of the box. the spider was 90 percent ripped off , and the coil still looked great.. i am VERY impressed with dc and will probably remain a loyal customer. !!!

you rok thorshammer

x2 on just the ca glue. i used that on my stroker on the surround and it held up fine.. i just wasnt 1000 percent sure and i wanted to ask.. i laid out a strip on a peice of paper and let it dry to see how flexible the ca glue was. and well its preety darn flexible. that rubber is really thick and looks dried up almost.. anyway to thin it back out? aka should i be able to squeeze it out of the bottle? another thing on the accelerator. i never use it. it makes the ca glue brittle and decreases its holding ability. i used to race model cars. and used ca glue all the time for the tires. i noticed if i used accelerator the tires blew off the rims alot sooner. than if i let it cure on its own. i only used it in emergencys when i had a round coming up and needed a different set of tires for that round. and needed the glue dry asap. it may not sound like the bond for a rc car tire is very important but when you have a 5 inch round peice of rubber spinning at high rpm and capable of balloning out to close to 15 inches its important.

hey guys i just got a level 4 15 with level 5 softparts and coil i also got three bottles from rusty one labled ca one labled rubber and one empty bottle labled acc whats the rubber and empty bottle for ? cant i just recone the whole sub with the ca glue? whats some good material to use to space the coil? rusty if you chime in. would it be possible to send in my 15 basket and new recone kit and pay a difference for a 18 basket and 18 recone kit?

even better. set your amp with a multimeter at 50 hz.. should be somewhere around 50 volts ac. for 2500rms@1ohm iirc and then play a 80 hz tone with the volt meter still connected and turn it to the left until the voltage starts to drop. simple and accurate

turn it to 12 0 clock play a 8 0 hz tone and turn it to the left until the tone starts to fade

you need to scan your music on audacity and check for clipping

lol its ok bro. we all mess up from time to time lol. usually when i dont know fully about something i search here.. self learn if you will

yuppers that be the setting..