-
Posts
429 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by anubis
-
its 42sq inches of port 3" wide x 14" tall = 42sq"
-
ok when car is off its 12.6-12.7 but when at idle i went from 14.4V stock to 14.8V and now 15.4V! wtf??? all ive done is removed the ac compressor and its jumped up the two times since thus the 15V range now and no big 3 yet. what could be making this happen and do i need to worry? car: 99 olds aurora alt: stock 140A plus big 3 is gonna be more time consuming than most cars since my stock location of my battery is under the seat with big fuses ill try to take pics or vids
-
i have an xmax of .9" which is 22.86mm so it says i need 10.44" min diamater! thats huge! and 78.52 min area?
-
thank you! all of you! this is why SMD is my only choice in forums
-
flared on both ends and only on crunch power zone 1000.1 for now so bout 500 rms at 1 ohm
-
its calls for 3.4 cubes with 2 4" ports at 8.25" but thats i guess 40hz and i want 36hz i would think 25 sq of port be too small
-
I know how to find round port area and all but when using round port(s) for an enclosure should I use the equal amount to square/slot port as recommended in Exosport's calc? Ex: building 3.5 cube box in trunk for a single 15" but using round external port and should i use: - 6" port - 4" port - 3" port and how many?
-
2600 max bout 1400-1500 rms but i say 1000-1200 real rms
-
1st off they are not MOFO model line 2nd they are discontinued line called FUBR (i owned a pair of 15s) miss them and want some 3rd dual 2ohm voice coil just google the specs on it FUBR SPECS
-
u do realize its a dual 2 ohm subwoofer not dual 4 ohm wire it to one ohm on the amp dude withe the gain lowered
-
wanted to know the price shipped to paulding, ohio two level one 12" entry subs
-
its a dual mono amp 1500w RMS @ 1ohm x2 last i checked
-
u cant fit 6 cubes in a cavy trunk? trust me it can be done...i had a 2004 sunfire and did it twice once with 15" PA FUBRS then with 7.4 cubes with 15" PA MOFOS first one was converting a slant face sealed box to a ported box enclosures fit in the trunk but from the fold down to back bumper where the port sits got boomy with lows on crappy PA 1920 2 channel plasama amp ask lanman b out what size u can fit in a cavy/sunfire
-
oh i see... thats y i use pioneer decks i guess
-
so its okay to have it outside the enclosure some? still got da cavy?
-
been there done that what loudness setting?... i use highs setting
-
little different question...but what about if some if ur port is outside the box...like bassbox pro 6 has an option for no flush ends... because 6" port needs to be 6" from enclosure wall correct?
-
i have a spare memphis old 4 channel now and wanted to know what size psu i need to run it? i tore one out of my old tower that was 250 watt and the amp smoked it after 10 minutes...... but my ssl cr5000.1 didnt wtf? oh and my soundstorm mono doesnt have fuses on the outside is that y?
-
4 12s In A Cobalt
anubis replied to andrewsowinski's topic in Member Videos - Host 'em & Post 'em! System Vids / Off Topic
hd 18?