Shinju

Actually it looks like its in between a HC800 Dimensions: 7.6" x 5" x 6" and HC1400 Dimensions: 9" x 5.3" x 8.1" if I am reading this correct.

98065 if the above passes. How long has it been sitting? Also how was it stored, not sitting on concret I hope ? Still have the Terminal plugs? Info for the masses Brand: Stinger Spv35 Battery Type: Dry Cell Max Peak Discharge: 1050 Amps 5-Second Cranking Output: 525 Amps Cold Cranking Output: 438 Amps Nominal Capacity: 35 Ah of (C20) Temperature Range: -15 to +50 C Diminsions: 8-1/4W x 5D x 7-3/4H

Kenwood kac-x301t Relesed in 2000, Kinda old best bet is to find a Authorized Kenwood repair center.

I have used the Tin Snip deal before, But if you are doing that in doors make sure you at least a rust prevention primer or rust protect spray on the open metal from the cuts to prevent rust. Moisture gets in the doors as we all know. The Dremel tool is another good idea as well.

I have a feeling they are around, I know Portland back in the late 90's early 2000's was off the hook, We had Phoenix Gold up here along with other really well known Car Audio manufactors. Alot of shows and sound off's but it seems to have died off. Seattle has a few big beats rolling around but no show's as far as I know. I miss the old day's around here atleast I remember going to Bon Tons in Northern Cali ( I think) and doing tons of shows in Medford Oregon with my minitruck back in the day. Even Eugene and Portland had some stuff going on back then. Guess people up here are just happy with a deck and speakers nothing wrong with that I suppose

Sounds like you need to make spacers or find custom speaker pods, My Scion xB holds 6 1/2 in the doors but the speakers are all one unit. Meaning that the pod and the speaker are one unit. they wer pop rivited into the door I had to drill them out and get some 1 inch and cut them to fit. I just made spacers, I made a template with the stock speaker pods cut them to fit and installed them. I have photos I just need to pull them off my camera.

I see alot of eastcoast and central and even southern westcoast car audio junkies but nothing from the greater northwest. Anyone on here live around the Northern Oregon and Washington scene? Seems like its dead up here in my neck of the woods.

Yep, Magnolia Hi-Fi when installing my Wifes system in her Convertible BMW hit a wire when pulling out the stock system and fried the Motor for the top, after all said and done it cost them 1500 bucks to replace it. And these guy's are professionals and do good work, mistakes happen I dont care how good you think you are you will make a mistake sooner or later. Doing this for friends is one thing but once you start acting like a business you will need to be Bonded and Insured to protect your own ass.

Naw lets see a sped up time laps full video 4 square super speed style! Cool cause and good luck!

Funny man, Great Comedian will be missed.

I am just curious why people make posts like these? Are you looking for some comfort or props for trying to out smart a audio shop? If you think about it selling audio stuff is quite easy, a good percentage of people really have no clue about any of this stuff. And the small percentage that do walk in and specify excatly what they want and how they want it. Now there is the internet so alot of smaller run Car Audio business are dying off. Kinda like Walmart Vs Mom and Pop Grocery Stores. I always hated the people that would walk in and pull my chain asking me questions about our stereo gear and then proceed to say that brand X and that store Z has this and its better. Its like why did you even come in here in the first place to tell me that my gear is crap ect. There is an exception to every rule, There are people that work in these audio shops that have little to no clue about car audio just like the general public that walks in the doors.

OMG I GOT ROLLED!

cool just let me know. I'll be poping it up on Sleezbay this weekend, My price of 120 shipped is the fourm price for you.

Asking 120 shipped This is pretty much what mine looks like, Mine still has the DO NOT REMOVE THIS TAB UNTILL THIS UNIT HAS BEEN INSTALLED lable next to the GND,REM and 12Volt terminals. Spec's 105W x 4 channel Max. Power Output at 2ohms plus 230W x 2 Max. Sub-Out 60W x 4 channel (2ohms), 120W x 1 channel (4), 0.1% THD Stereo @13.8V (RMS Continuous Power) 40W x 4 channel (4ohms), 120W x 1 channel(4), 0.1% THD Stereo @13.8V (RMS Continuous Power) ChannelFlex Crossover Adjustable High-Pass Frequency (50?200Hz for Front) High-Pass Frequency (120Hz for Rear) Adjustable Low-Pass Frequency (50?200Hz for Subwoofer) High-Current, High-Speed Output Devices High-Efficiency, High-Energy MOSFET Power Supply Audiophile Grade Component Selection Intelligent 7-Way Discrete Protection Circuitry Noise Reduction with Low Distortion & Ultra-Low Negative Feedback High-Level Input ? Add on Capability Epoxy Composite PCB 2 Stable Design

Not a 4 channel but I have a 5 channel Eclipse that I'll make a deal on. its in my For sale ad. I lied its not in my for sale ad, well here is the info anyway. I also have an Eclipse EA3532 5 channel Amplifier. This isnt mine I'll post photo's later Its in really good shape has a few knicks and scratches but nothing major workes perfect.

PowerBass XA-1500D! Oops thats not an option!

USB sound cards are pretty nice for Sound Quality, I have a USB Sound Card Headset on my head as we speak! its a Beta unit that Microsoft is making it also has a Mic on the left side for gaming or Skype or any app that uses VOIP. USB Sound is designed for PC's that dont have alot of extra PCI Bus slots, And PCI-E is for Video Cards that replaced AGP. Plus USB has a pretty fast transfer rate with USB 2.0 slots

Nice work and well deserved you definatly show them non believers who is boss. I always show off your Eye Pop out vid to friends, That kid in your passenger seat in that video could be my lil brothers twin its uncanny! Good Stuff bro, Just keep them comming!

More of a Low End Mud Buggy then a Go Cart . You own it now might as well go run the shit out of it.

Its bangin for using a stock deck with a line level converter. Pop in a real deck re tune it and then see how much more sound you will have .

to lower a Ranger the right way is going to be expensive, You will need Custom Ibeams and Camber corrected Spindels, If you just hack the springs or take out the Ibeams you will have a serious camber issue and will go though tires once a month depending on out much you drive. Rangers are the worse mini to lower but if done right they look sweet.

Like I said, It's really hard to tell from that picture. And I could be wrong. I know the Gallardo is Shorter in length then most of its bigger brothers but still has a pretty wide wheel base to handle excessive cornering ect. This is a real Gallardo same color ect. Just looking at its stance it just looks much wider in this picture here. Anyway funny picture. I am no expert on these cars just a fan

That yellow car is a kit, looks like it could be a Fiero Lamborghini kit or a custom Tube Frame kit. That doesnt look wide enough to be a authentic Lambo. Lambo Fiero Kit Hard to tell from that picture but that doesnt look like its an authentic Lamborghini to me.

Click Varooom KABOOM!!

A Major bitch in the C-Unit division with a silent I. I cannot believe this even got to court let alone a lolverdict in her favor.