bobonit

The front most bolt goes right into the battery terminal, that one hole is just drilled, not tapped.

Oh yea, that Knu is awesome to work with. Its the kolosssus fleks cable. The bars are 3/8" x 1.5" copper from www.mcmaster.com drilled and tapped for 5/16 - 20.

That statement is incorrect. When I ordered my 6" Aeros, I emailed PSP Inc and was told to get Thin Wall 6" Sewer Pipe for elbows. I did and they were a perfect fit. Edit: Found my invoice, I got them at Ace Hardware Outlet. Linky: Genova 42860 PVC S&D Sanitary Elbow Hub 6" Painted them black with some Rustoleum for Plastic. You can either use PVC Cement to glue them together or get some Gorilla Duct Tape, its black too. I got the Genova fittings. I can look up the part number if you need it. Got them from Ace Hardware online. Lowes here only had the thick wall stuff which will not work.

Same here, I learned about them on SMD as well. And then I came to find out they are about 10 miles from my house !!! They are super nice in person as well.

I'm liking that low Fs

Yea, you probably have a 50/50 chance of getting out of a ticket. But on another note, I hate HID's that are in the blue range. The light disperses to much and even if you don't have your brights on, it can still be blinding to oncoming traffic. In Florida, you are not allowed to have ANY blue or red lights (except tail lights) on your vehicle, that is for emergency vehicles only. Why attract attention to yourself? I DON'T want the cops to notice me...

Now ain't that some shit !!!

Dude, you look like a kid on Christmas morning, congrats on your achievement!!! Wonder what 2 SMD 15's would do to my Maxima???? h'mmmmmmmmmm

Hell yea, post it up !!

I got my ice cream, i got my ice cream, but you don't got none, cause you on the welfare !!! hahahahahaha I used to have that cassette. Thats how old I am !!!!

Yea, I'd have saved the 30 bucks for a fuse holder or something. And learn how to spell. Tha spelling you were using waz incorrect.

That really adds a whole different dimension to it. I found out about my friend after the fact. I couldn't imagine knowing about it happening and not being able to do anything about it. At least your have your girl to help you out.

Wow sorry bro, I'm sorry to hear that. I know how you feel. One of my best friends and former roomy committed suicide in July. All I can say is, try to remember the good times.

Its also in the System Of The Month Thread !!!

Most likely I'll be placing an order for a batt soon, I just have to measure what I can fit up front.

Damn, that place has good prices. Don't bother with my links hehehehe

US Plastics They have: Acrylic Sheet 24" x 48" x 3/4" (.750) Thick $205.38 Acrylic Sheet 48" x 48" x 3/4" (.750) Thick $418.23 Acrylic Sheet 48" x 96" x 3/4" (.750) Thick $654.64 You can also try McMaster-Carr Go to their raw materials section. You can get acrylic in smaller pieces.

He can only upgrade to 64bit if the motherboard/bios and processor support it. You need a processor that supports EM64T and a motherboard to support that processor. And if both pc's use ddr2, you would probably be ok putting the ram in the other pc.

Unless you are running 64bit Windows, you will only see 3gb to 3.2gb of that memory. As far as putting the 2 1gb sticks in the other computer, can't answer that without knowing what types of memory are in each.

IMHO, you were not enough of a dick

x2 on the black spray paint. Just mask it with low tack painters tape.

Yea, they are all covered, and if my measurements are correct, a D925 would be about the same size?

If you paid with a credit card you can dispute the charges.

Nana's Wangin!! Thats awesome. You could use some Great Stuff to seal off the cabin from the trunk to make the most of what you put in there. Kudo's to having a cool granny.