fischy fisch

not about that but since they have done what ever there doing kinetiks have sucked they only have a 15 second or so charge of full power ive switch over to optima's retops and my volt done even drop and i have less battery power

ya i see what he saying you need one hell of a power supply to run that much power

go with a ddaudio 9500 18in thats me and my buddy plan is to be a 150 ground pounder with a single sub and the rms is only 1500 but you can put 4000-5000 watts on it no problem

idk it happens it me so i wrote on my box if you touch it i pch you and it works its just happit

o shit

when every thing is tuned right i promise its louder http://vids.myspace.com/index.cfm?fuseacti...nelID=377008353 look at the ones about chris jones when he burped it he burped a 50hz tone and it tuned a 38hz did have the right track and look what he did a 154.8 or somthing when its all said in done it will be a 160 but what sucks with dd it take like 2months to fully break then in and when you do you gain like 5 db over time

dd or sure but i dont know about 4 of them if you have the room i would but they need like 5.5 cu each and a good 4-5000 watts and mahem my buddy in edgwater fl has 4 9500 18s on 25000 watts its is so bad ass http://viewmorepics.myspace.com/index.cfm?...albumId=1900087

box it number one thig he need to get right but with a good 4000-500 watts on the 9500 they wake up so much is crazy

red logo or red composite cone because if the cone is red its eather 3500 or 9500 most likely but the 9500 are bad ass and if hegoing to run 4000 watts do it right thats his main issue

the thing with dd's are if there tuned that low you need a big box for them my buddys dd9500 18in is in a 7.5 cu enclosure (even know dd site recommended 6cu) and he aint got enuff power on them mostliky they wake up so much more power i know its off topic but what modle dd's

semi wall with 2 15s with a removable port or spl and one for daily just throwing out my ideas

im not a big fan of memphis and there are to many people running fi blts but memphis for my vote but look in to digital designs they are great spl woofer and if done right they can be great sq too but that my 2 cents

no problem just when someone else need advise you should help then as we have you but no biggie just doing what i can to help

glad you got every thing working

testing and tuning is the best way and the only way to get loud and when you meter it do it on a tl

fucked up rca sound like

so it work fine on another revicer and youve got screw terminals holding you wire on to the sub

id say messed up tinsel lead or blow sub/mess up coil

man you just teasing him now idk (not saying you wouldnt)but hadd to mess with you

still some one would beside they wont have enuff room to move you suffocate them

bandpass 6th order is a must but more cone are for sure do 18's do 24of them

seat removal and 15's for sure and just to say it go with a digital designs 9500 series 15

i cant say much i would of done the same but why blue tops and what kinda of 15's and 36 amps wow

i ran one of these a while back i used 3.4-4.4cu is what i have and i think 30sq in of port 18in deep thats what i had and it did great but didnt last long has a little over 1500 watts on it at one ohm lasted about a month but this was when i didnt know about voulme control but thats what i had for my enclosure for a single 15 procomp(p3.0)

if it was up to me i would make it to wear it fits in the hole for the back seat meter it then flip it around if its louder towards the front keep it and seal it off but it realy depends on the car ive done both and diffrent results each time