sphinxbccp

over 840,000 gallons. My link

cool vid, i commented on youtube so theyd know where i seen it!

like stated above if the leds are 3 volt youll need a resistor, or you could wire 4 in series so resistors wouldnt need to be used

You just made my night.

My offset is +15, i only get alittle rubbing when i have the steering turned all the way to one side, my tires are 235/30/22

I got mine from here: http://stores.ebay.com/rims4lessnyc__W0QQ_sacatZrims4lessnycQQ_sidZ608461837?_nkw=blazer&submit=Search&LH_TitleDesc=1 ive had them for 2 years now with no problems

do you still have the 15" rubber gaskets? if so how much for 2 shipped to 49017?

http://www.youtube.com/watch?v=tQDEkxD8ed8&playnext_from=TL&videos=tm6-wzWtWiw

i called jbl and after being on hold for ~27 minutes i had a 45 second conversation with the tech support... he said it would be bad to use a splitter... so new question, which rca bass level controller do i get? PAC or peripheral?? or what others are there?

i already got it but i wanted to ask first, i dont want to mess these amps up!

mine has 4 pins, its RJ11, but its flips colors from one end to the other normally, but using the splitter it flips once then again after the splitter which makes it the same on both ends

any other opinions?

Im trying to figure out how i should do this so i don't mess up the amps, i have two jbl gto1400.1s, this is my diagram lol The colors are the four wire colors that make the phone lines (RJ11), the top diagram is what would happen if i used the splitter i have, the bottom is what the wires normally do, im wondering if the fact that they dont flip 180 degrees will cause problems? thanks!

I was freaking out, glad to know I'm not going insane... yet... lol

the foam isnt hard, and it doesnt stick out the sides

The piece of MDF is secured to the box with different screws then what holds the amp, theres also a piece of foam over the screw heads where they would make contact with the bottom of the amp, this is a QUICK paint diagram of the rest lol please let me know if its ok or what would make it better

I'll take one of those pallets off your hands!!!!

i plan on putting my roof rack back on and throwing my stock tires up there (yes someone will say roll with the stock tires... their a worse ride then the rubber bands.) ive driven to CO before but it was in a stock f150, there roads were pretty good the whole way but this was 3 years ago...

Thinking about going to Colorado with my blazer, it would be about 1300 miles each way, tires are toyo proxes 4 235/30/22 (yeah... rubber bands!...) my question is would i have problems? I'm a decent driver an can swerve potholes but i didn't know if there were other things to consider? thanks for any help!

Change the resolution on the computer to a lower setting

Also watched it last night, as previously stated the whole stark/iron man ratio isn't quite right... it was ok but ill definitely have to watch it again when theres a better torr.... errrr "view"

soo uhh gogo lvl 1or2 8's????

i used ledglow, only had one problem but they took care of it an their stuff is BRIGHT this was my blazer last summer:

it looks like its leaning, maybe its the angle??