Rebel4055

You sir, are a jackass LOL!

Problem fixed. After bugging around with the internet card I uninstalled the graphics drivers and reinstalled fresh ones from the site. All's working great now.

YESSIR! I'll be back in an hour with a report Its a pci ethernet You want my number in case you run into problems? If its a PCI card then yeah the PCI lane may not be getting the juice it needs.

Yeah I would get a 550-650w PSU. Corsair,antec,cooler master,thermaltake are all good brands. If it is the onboard ethernet the powers supply may not be able to power everything correctly.

May not be a graphics issue, it may just be a separate problem. What power supply do you have also. Try updating your internet adapters drivers or reinstalling them.

FTMFW!!! http://soundcloud.com/bassnectar/deftones-prince-bassnectar-remix-free-download

If they are helpful and nice, you could tip anyone. If they are like some people, like new young waitresses that slap your plate on the table and just be rude, they don't deserve a tip.

That knob is NOT a volume knob, do not set it to whatever, if you do that you could still be clipping the fuck out of the subs. Look for a guide on here on how to set your gains with a DMM.

Run wire from the front batt both + and - and just hook it up. Perferibly 0 gauge.

And clipping can cause voltage drop too.

Well to fix the voltage issue, take the cap out and burn it, do the big 3 and get a new battery up front and put one in the back.

A square wave will blow the hell out of the sub.

Uh ohhhh I know your plans for that lumina

Oh no no no. They are definitely soldered. With electrical tape covering the exposed wire. Oh ok. double check and make sure there is no wire touching anything tho, a little slit in the wire could cause issues.

Yikes, just electrical tape holding the wires together? Might want to solder them or crimp them...

And malwarebytes is a free download and you don't have to pay for it if you don't want too, it doesn't stop the service as a on-demand scanner. That's all it is, is a on-demand scanner when you don't buy it and is one of the best on-demands out there. And to the hard drive failure, that doesn't sound like something windows would do but I'm not for sure.

Yep, what headunit are you going with, what car, what amp.

It's a pain tho. There is NO WAY i'm gonna be able to fish a 0 gauge wire through the factory location. It's tiny. I'm gonna have to run it under trim panels and stuff. Second, the alternator terminal is under the air intake, so i'm gonna have to remove that, or come from under the car, which i can't even tell if it's accessible, and i don't have a lift or blocks anyway. I think it would be easier to just take it to a shop, like, even with the cost involved. IF you have to do all that then the labor costs just jacked up at a installer. If you are still going to have a installer do it, do NOT take it to bestbuy. What do you mean "IF" ? I will have to do all that. I didn't just make those steps up lol. And i wasn't planning on it, i was thinking i'd take it to an alternator shop or my mechanic. whoever will do it cheaper. I didn't mean the big if lol sorry. You would take it to a audio installer more than likely.

It's a pain tho. There is NO WAY i'm gonna be able to fish a 0 gauge wire through the factory location. It's tiny. I'm gonna have to run it under trim panels and stuff. Second, the alternator terminal is under the air intake, so i'm gonna have to remove that, or come from under the car, which i can't even tell if it's accessible, and i don't have a lift or blocks anyway. I think it would be easier to just take it to a shop, like, even with the cost involved. IF you have to do all that then the labor costs just jacked up at a installer. If you are still going to have a installer do it, do NOT take it to bestbuy.

You will spend a good chunk of money to have a installer run that wire. Probably DOUBLE what you paid for the wire.

Just making sure I didn't want someone to get jipped.

Interesting.

If you bought from him off of here he didn't follow the rules at all.

Thanks guys! I have more guns in the gun cabinet I'll probably take pictures of.