87accord

yes sir that is what i would like to do

ok well my build that got put on hold is getting started once again i have a questions for all of you i was looking at putting two level 5 18" at first. but i would like to do 3 level 4xl 15" if i have enought room for the port. will the level 4xl take to digtal design z1 straped or should i stick with the level 5.

dam it sucks when you are not expecting it

yeah i have a second shock sensor on the way. sucks but oh well

that the problem i will have to mount tight to the panle to make it fit. That brain is huge compared to the old one without remote start

i know in the manual it says not to mount it solid and the last alarm i installed had a remote shock sensor so it was no big deal to mount the brain solid and mount the sensor to some wiring so now the 5901 has the shock sensor in the brain how bad is it going to sensitive it been a long time since i installed a viper alam

ok thats why i wanted to ask i have seen them around while looking for fuse

i thought so that what we call it at work but we got it worked out thanks for all the help guys

ok that is what i was thinking was going on thank again for the help have you used those resetable circuit breaker? if so are they any good or do they wear out over time

thank for the help sq monty but i dont think we are on the same page about the wire size here is what i found sticky Maximum Fuse Size 00 awg 400 amps <-------------this is the wire i have 0 awg 325 amps 1 awg 250 amps 2 awg 200 amps <--------------not this one 4 awg 125 amps 6 awg 80 amps 8 awg 50 amps 10 awg 30 amps 12 awg 20 amps 14 awg 15 amps 16 awg 7.5 amps These are the recommended maximum fuse ratings for the corresponding wire size this is were i got the 400amp fuse from but the biggest i can find is 300amp i hope this make sense i know my spelling suck and makes it hard to explain my self thanks for your help jeromy

ok the wire is 2/0 awg wire

ok hold on yes the wire is 2/0

the wire i have is 00awg i though it was 2/0 but i might be wrong ok just looked it up and yes it is 2/0awg wire or 00 not 2awg so would i be correct with using a 300 amp fuse since that is all i can find

ok i think i might have found my answer here it goes since i am running 2/0 i should have a 400 amp fuse up front then another 400amp fuse in the rear right before the battery and a 300amp fuse for each amp since my amps are dual power and ground inputs i should have a 150 amp fuse on each input totaling 300amps right? so this would be the lay out alt----[200amp fuse]------battery------[400 amp fuse]------[400ampfuse]--battery---[300amp fuse]--amp

anyone? do you need more info? any rule of thumb?

300 amps on each amp so 600 + 80 for the kenwood i think sorry at work dont have the amps here

ok this sounds dumb but i can take without crying im getting ready to run my power wire to the back of my car (2+ 2- in 2/0awg) and need to know what size fuse i should run for the battery i will have two interstate SRM-4D in the back what size fuse would be needed here are the spec on the battery if it is needed cca 1314 Reserve Capacity Min. @ 25A 390min thanks for the help guy i just dont want my car up in flames oh im running two dd z1 and a kenwood 4ch

same place i got mine from

i payed around 112$ for the 50ft of black welding cable i use in my accord and it did two runs front to rear i should have the red some time this week for the next two runs the stuff i got is real flexible

wow that was diffrent mad skill

hell yeah it looks like that ass end is getting low

looks nice sign me up for a set

have you talked to rusty you will be happy with the price he gives you

dam im glad i saw this before i spent any money it look lile i will get my alt from mechman

im getting ready to run two lvl5 18 in my honda but the lvl5 need around 8cft a piece per rusty