fox_racin4

Jacob, youve got mail!

I had 2 18" Fi BTLs in my basement... forgot exact box size but it was around 20 cubes on verrrryy little power (sub chanell of a 5.1 system lol) it was doing 130s at 23hz i had the term lb mic where i was sitting on the couch...

i acctually thought about type rs for the new build.. only thing that stopped me was their not reconeable

i had a re audio 35.1 to the sub at 1 ohm.. daily in 1.75 cubes ( to big for it) i ripped the spider off cone 2 times ( fixed with epoxy) but if box was smaller im sure it wouldnt have ripped spider.

i had 1500rms on my single 10

would yuo not have the same pre out voltage when testing just one speaker?

yeh i've heard of them. i've heard of a lot of companies, flowmaster is just so dang popular. i'm a go up to my nearest muffler shop and see if i can test and hear a few varies of mufflers. i normally play around on youtube, sort of helps me determine. just remember, your truck wont sound like others.. many things change the exhaust tone.. size of pipe, where it exits, how long it is ect. but all flowmasters sound pretty well the same lol

AQ, DD, DC, orion ( older) sundown cresendo american bass lanzar opti theres more.. thats just off the top of my head

ive done LOTS of trunk installs, 2 12s 4 10s 1 18 ect, the 2 12 were DD9512s with about a day of play time on them on 3k did a 146@32hz in a trunk, subs up port firing to rear corner the 1 18 on 3k did a 142..

everyone using flowmasters!! especially around me!! try pypes , gibson or make it yourself, if you have access to a welder its not hard to do your own exhaust if you know how to weld and cut pipe

if you can, do one at a time. like spider, let sit for a day to dry then surround thats what i do anyways!

You dont NEED the acctivator, it will just take longer to dry. get it all glued and let it sit for a few days just to be safe

i had mine maybe.. 9 months ago.

lemme know if you need a hand with anything Corey, ill do what i can!

are you sure those are level 3s? the level 3s i had the surround went right to the dustcap and was bigger then that, to fix your issue make your box smaller

My AQ went into protect after hooking it up once for no reason just unhooked and hooked back up and was good. also had an SD8k hav that problem, the remote wire wasnt far enough into the amp.

im not to far from there!

he needs 2 IIRC

It is bagged

I'll measure specs tonight and send them to ya. Are you going to Kitchener show? will be there forsure! 2 shows, 1 weekend how can i miss that!!??

hey Kevin, can you Email me the coil specs for the strokers [email protected] any more vids of this beast?

heres a shitty explanation put the bolt threw box ( with wire conected to bolt) then on outside put a washer then a nut.. tighten that as much as you can, then on the outside it will be like a stud, put a washer then your wire then another nut/wingnut

how would i properly set the LPF at lets say..60hz

this is a loud car.. lol

Send them an email [email protected]