Ji553r

dealer near 28546

yep as soon as i bought my Explorer last month I bought 7 dif products from Meguiars and last night I spent about 3 hours washing drying and waxing it it was my first time so theres a few swirls but Im still proud and it was a good experience

im interested

what did you fill that had 250 gallons for gasoline?

you have any pics of the Explorer and build?

03 Dodge Stratus sxt sedan.....battery in front of driver side wheel well underneath EVERYTHING! took no more than 16 feet underneath the car up into the rear of the trunk.

it does? i thought i checked them way back and they had no clipping. if thats not satisfying for you go to tunez and click on the thread towards the top that says Decaf and in there he has a tone to use that will be more geared towards music bc its like -3.8 db or something like that instead of 0 db edit ninja'd

sweet what other products will you be doing?

200. Ive had a Pioneer 6900 ub offered to me and the only other thing Im really looking at is a Kenwood excelon 494 so far both of those look like theyd suit me but im still searchin

What do you mean going into? like setup wise? yeah

Ok im lookiing for a head unit with a few stipulations: Single Din at least 2 sets of 2.5v preamps front USB, 3.5 mm aux preferred but not needed (also need to be able to control ipod with usb connected) Cd player Im stingy though so i apologize ahead of time if you think somethings perfect for me but Im not feeling it.

What are you wanting to spend on one?

I'd like to know too. sorry for not helping but what else is going in your explorer?

19.25 back im pretty sure. then yeah 5.75 to both the right and left. then when you take a string and put it from the front of the port to the back and around the corner, touching the port at all times, that string will measure 25.75 inches

i know that but i dont get it do you divide it by 2 when make a 2 common wall or wtf? yes with one sub on each side the port needs to be cut in half because each sub is sharing the 4.5 inches in the center. so if 1 volume of air with 4.5 inches on the left meets another volume of air 4.5 inches on the right thats now 2 volumes of air in the same 4.5 inches in the center which compresses things differently EDIT: again this is just what i gathered from reading the site if anybody else can help please chime in.

its chicken scratch but i dont know how to use sketch up so this is what i got :/

where it says physical port length on the right towards the bottom is how much the length of the wood needs to be. you just take it straight back in the center spaced 4.5 inches (port width) apart then when you get to the last 2.25 inches (4.5 width divided by 2 for left and right sides) you make a 90 degree turn to the left and the right. so doing the math you would do 23 inches depth minus the front and back walls(1.5 inches) then minus the 2.25 inches of port width for the "T" section on each side. leaving you with 19.25 inches. so make the port 19.25 inches long then 25.75-19.25 = 6.5 inches going to the left AND the right at the 90 degree angle. EDIT: somebody please correct me if Im wrong so we can help him out here

should be loud you gots nice port area

Sorry I know both of you would have been better homes than my ride for it lol. I'm just looking to get it gone.

lol sorry guys.....sold

sorry its gonna be a lil till i can get exact but it was exactly long enough to go from the front of the engine underneath the car and up into the trunk. 16 feet at max. but ill get back to ya chief

Alright well Im starting to sell everything from my build. I have aprox 20-30 feet 0 gauge Kolossus fleks cable from Knukonceptz along with 3 fuseholders made by Stinger. Every end that has a terminal which is majority of them, is soldered on. Also included is a 12" piece with a terminal soldered at one end i must have dropped it earlier. NO FUSES INCLUDED with the fuseholders. Please note the little battery terminal at the end of one of the grounds is not included it was gonna rain so I rushed the pics on the ground also forgeting the paper with my name so I hurried back out to get it. If needed I can lay them all out again with the paper its just gonna have to wait until tomorrow. That tape measure is out to 12" exactly for reference. Price 35$ shipped to any lower 48 states. I mostly want to get rid of it and give it a good home so its mainly enough for 2 large flat rate boxes. Also wire is dirty but thats just cosmetic. Works great. edit: also Im in Jacksonville, NC so if you wanna pick it up how about 5$ for a good deal.

Found it online....Clarion APX1300. 400 watts RMS feeding 2 clarion 250w 12's. http://www.clarion.com/us/en/products/2007/audio/amplifiers/APX1300/us-en-product-pf_1165294762681.html