Jump to content

Skullz

SMD Silver Member
 View Profile  See their activity

  • Posts

    5961

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Skullz

  1. Skullz
    Sometimes helps to stand back have a seat fire up a smoke and ponder for a few and it becomes clear. Well it used to for me when i still smoked.
  2. Skullz
    Yes it will work unless the bolt isnt long enough then its a trip to the parts store for a longer one.
  3. Skullz
    If you cut the rubber on the outside of the terminal the bolt should pop out letting you slip the new lug in there so you dont have to cut the plug off.
  4. Skullz
    You don't have to remove the old wires just add the new to it, so just unscrew the nut on the alt and add the larger wire and add the others to the chassis and battery.
  5. Skullz
    The tuning is off, you forgot to check the slot port which brings down to 25.41hz.
  6. Skullz
    Yes just the one port and that was figured inside the box.
  7. Skullz
    If you built it to 1.5 with no displacement then a 3" would need to be 12" long and get ya to 36 and a new over all volume of 1.3 with a .10 sub displacement.
  8. Skullz
    Should work but only really one way to find out, make sure you back everything you want up so you dont lose it before trying and also make sure you have your disk to reinstall in case it doesnt work. But at the very least you'll have a fresh install either way.
  9. Skullz
    http://cgi.ebay.com/Precision-Power-PPI-PC...=item3a56ba675f
  10. Skullz
    Tuned pipes are pretty cheap, never hurts to have more tires on hand either. I've been out of the hobby for 9 years so i can't really say what you should look for but definetly stock up on breakables.
  11. Skullz
    See if you can boot into safe mode, F8
  12. Skullz
    I popped the top of my dash earlier and seen that isnt anyway to enlarge the openings anymore for larger speakers.
  13. Skullz
    Audioque 1200 or 2200, Audiopipe 1500 or 3k depending on his budget.
  14. Skullz
    Removing the top of the dash is really easy but you'll see how hard it'll be to try and cut it up to make a larger speaker fit and really wouldnt be worth the time and effort to try it.
  15. Skullz
    I dont think there is enough room to make em larger without major cutting.
  16. Skullz
    http://www.geekologie.com/2009/03/bacon_an...uffed_pizza.php
  17. Skullz
    USPS sucks in the tracking department. They say it can take up to half a day but thats just garbage, it takes alot longer and the package usually arrives before it ever updates.
  18. Skullz
    If you have no use for the a/c than by all means remove it and replace it with a new alt and all you'll need to do is to find or make a new bracket for it to go on.
  19. Skullz
    Run the ground to the same location as the amps connected to and that should completely remove all of that noise.
  20. Skullz
    The new throwback pepsi and Mt. Dew taste so damn awesome.
  21. Skullz
    I won't use a car wash that doesnt close atleast one of the doors to keep the damn wind from freezing you to death from water spray.
  22. Skullz
    Being lazy and having your nice ride burn to the ground cause your too lazy to drill a hole is the stupidest thing i've ever heard.
  23. Skullz
    There isnt any problem running them inside the car as long as you protect them from sharp corners next to metal and use the proper grommets for them going through the firewall and use fuses on both ends. Using too small a gauge of wire can cause the wire to warm or even heat to the point of melting but thats from not using the proper size for your application to begin with.
  24. Skullz
    I use welding wire in my setup, here is a good place to get some but you can go to any local welding supply and buy from them directly. http://store.weldingdepot.com/cgi/weldingd...tml?id=HkWBu5EV
  25. Skullz
    Error occured
×
×
  • Create New...