Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. no way you can tell if subs are out of phase by watching a video. probably an effect of the camera making it seem that way. just thought i would throw that out there.
  2. Bought some RF power and ground wire from him. Shipped fast and delivered exactly as advertised!
  3. Wire showed up today, exactly as advertised. Thanks man!
  4. mmm. i like blue. mmmhmmm
  5. Sub level you will typically set at max (or near max) Bass level (the EQ function) you will set flat.
  6. Skip the isolator. Wiring: Big 3-ad wires to what is already there, keep factory wires in place. 2nd battery-hook + of both batteries together. The - you can hook together or just use a good ground in the back near your 2nd battery.
  7. as far as gains go, the DD-1 pretty much to their spots. But you will run into the same problems setting your gains with an o-scope that you will with the DD-1. Neither will tell you what the music you are playing is doing. You set the gains on the amps to match the maximum non-distorted power coming off the deck. That was the purpose of the gain from the day it was invented. If a song (itself) is a little bit dirty, i don't think its going to make that big of a difference, especially on the woofers. I think you guys are over thinking this a little too much. Knowing the decks maximum clean output and matching to the amps and adjusting the overlaps using the different tracks is the goal. -5, -10 db etc is there for gain overlaps not to over/undercompensate for a potential dirty song. the dd-1 wont do everything, you still need to have a clue on what you are doing. You can still f**k your system up but the chances of doing that drop by 90% if you set the gains the way they were intended from the begining, even if you play dirty songs. According to you guys, everything i have ever played is "dirty" and "clipped" (the song itself) and i never seem to have problems. You should still know your systems limits and pay attention...especially if everything you have is overpowered, like a lot of people roll That is what I tried to say. I didn't word it too well. I also left out TOOK in my post. I meant to say the DD-1 pretty much TOOK their spots as far as setting gains is concerned.
  8. as far as gains go, the DD-1 pretty much to their spots. But you will run into the same problems setting your gains with an o-scope that you will with the DD-1. Music can still be clipped regardless of how well you set your gains and levels.
  9. yeah, set your DMM to AC and play a test tone. If it shows -volts then you have it backwards.
  10. lol, only knew that one because I have done exactly that before
  11. selling the RF 0/1 power and ground together too?
  12. It might be ok to watch the voltage, and I have no problem with that at all... Earlier I was simply giving my opinion for an electronically sound system witch I prefer if I were going to be blasting music for a long duration of time with out having to let my alt catch up causing strain to the system... I just don't enjoy being called a liar when there are facts to be considered, and was simply liberating myself. Don't mean to be rude to you or any one else. I just want to make the facts known and not be bashed for it cause its not the "normal way". Again not trying to be rude. I didn't miss the point, and actually said it was FINE. The equation is not pointless to throw out, and it was to justify MY POINT of an electrically sound system, which IS CORRECT that is the point that EVERYONE HAS BEEN MISSING. Again I have no problem with watching the voltage, nor am I trying to be rude, just defending myself. fair enough
  13. yes, most of us know all of this. the whole point was it is pointless to throw out formulas showing what the amperage draw is, the best we can do is guess, too many variables. adding batteries can help when an alt can't keep up. Then after that yes, you need to charge them back up. That is why Kranny said to watch the voltage. When it gets low, shut the system off and let the alt take it easy for a while. Let the batteries charge over night, rinse and repeat. Most of us don't have big enough systems OR we don't play them long enough that a high output alt is necessary. That was the point you missed.
  14. Well using physics, University Physics II to be exact... His first amp can put out 2600 watts plus the 400 watts of the second amp = 3000 Watts. Lets say 14.4 volts is desirable... Using P (watts) divided by E (volts) equals I (amps) or 3000/14.4 = 208 amps roughly and that's without the in efficiency of the amps or the cars draw... he is only charging with 160 amps, my logic doesn't add up??? Ok then... Or the since we are just going on assumptions, he is running the amp at 4 ohms, so 50x4. and the hifonics amp probably does around 2000. so more like 2200 instead of 3000 like you were assuming. that gives us 152 amps. In that case, adding a second battery would do a lot of good. There, the facts are known.
  15. i know. but he also said he is using to avoid warranty issues. im saying there won't be any and you don't have to tear, break or cut anything to use an aftermarket H/U.
  16. an extra battery itself won't really hurt your alt at all.
  17. No reason you have to damage anything to use an aftermarket H/U. No reason it would void any warranty.
  18. i would put my money on one of the LOC inputs being wired out of phase.
  19. probably have one of the speaker inputs wired out of phase. The inputs to the line out converter that is.
×
×
  • Create New...