Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. I hope your good friday and easter turned out to be than jesus' was.

  2. am i nuts or are there 2 threads on this?
  3. I probably will be there.
  4. Clipping IS distortion, so no you can't clean and clipped.
  5. yeah I recognized pink floyd for sure. what i should have asked is what gorilla zoe song is that.
  6. damn, i should drive way up there and have you do my doors after I try and fuck em up.
  7. now that i typed that, i'm not 100% percent sure that is right.
  8. na, -6 is "low side", -12 is fairly standard, -18 and -24 are "above" standard ninja'd like a MF'er!
  9. i would personally hold on to those amps until you decide what subs and mids and highs you will be using. Those are nice amps.
  10. I would imagine most aftermarket units do it that way, but not all headunits are aftermarket.
  11. I agree completely, but the o.p. made it sound like he does switch back and forth, I just figured he could eliminate clipping there by check it too. yup you would be right woohoo!
  12. it depends. my stock radio let the ipod do it's own converting and the ipod sent an audio signal through the dock connector. the only thing the radio did was control the ipod.
  13. yup, i just figured if he was going to be checking multiple inputs it would be easier to keep it plugged up to the output of the H/U rather than to keep switching.
  14. the other sources can clip. best thing to do IMO, is record a test tone track onto each source and check the CD player's output with a DD-1 or o-scope. That way you know what is happening rather than guessing.
  15. I'll take that as an "I don't know"... Correct, I have no idea what the THD is of your amp, the only way to know is to measure. Even the rating given on the box isn't exact which is why they usually say THD is <1% (or whatever number). I'm still a bit confused why you are so worried about the THD of your amp though.
  16. it would help a little reinforcement and reduce flex resin by itself will not reduce flex. you need to add mat to resin to get any kind of strength at all. Resin by itself will do a couple things; help seal the wood, if sanded it will smooth the wood and can make it easily paintable. If you are adding resin only to add strength, you ain't doing it right!
  17. Yeah, but if you use the -15dB track to set your gain at 1% then play music that is recorded at -5 or 0dB the THD will go up correct? My question is, how much will it go up by switching?And MrSkippy the DD-1's not going to keep me from overpowering the subs, just give me a rough idea how much I'm overpowering them by telling me about how much over the <1% THD Jake used when he rated my amps that I really am. I hope that helps. I confused myself a little there. lol You need to worry about clipping the signal before even considering how much THD you have. If your main concern is overpowering your subs then I would stay far away from using -15db to set your gains. That setting gives you the least amount of forgiveness of any of the settings.
  18. Ah my bad, with all these questions about THD I thought you were worried about noise in your system. How exactly do you plan to keep from over powering your subs using the DD-1?
  19. any particular reason you are set on using the -15db setting and are worried about THD? If you are worried about noise in your system, the last thing you want to do is have your gain cranked up.
  20. And just to add a users experience with a true CLD deadener, I put 3 sq. ft. of Alpha Damp in my front doors total (1.5 sq. ft. per door) and it was all I needed. You truly don't need full coverage to deaden the panels resonance.
  21. resin itself adds no strength.
×
×
  • Create New...