Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. One of the beautiful things about the DD-1 is you don't actually have to unhook anything but the speakers from the amp. You can simply turn everything too minimum and adjust down the line. Assuming you have an amp since you mentioned a line-out converter, just attach the DD-1 per it's instructions to you amp, turn the amps settings according the the instructions, set all you EQ, loud, boosting, etc...settings according to the instructions. Then with the 0db tracks (40hz and 1khz) find your average for your H/U with the DD-1 hooked up to your amp. Turn your H/U to whatever volume you found to be your max, now adjust you line-out up until the DD-1 shows disortion. Do both of those with 0db tracks and use whichever tracks you want for the amps, I recommend the -5db tracks for those. Feel free anyone to correct anything I am wrong about or add anything I left out.
  2. The Fakuda designed one? That was my first love! That van is stunning Old School. I think it is still intact- which is nice. ;D i think his blazer is hiding somewhere too, not sure how intact though.
  3. The Fakuda designed one? That was my first love!
  4. Ooh an Astro! That was the vehicle that really started my need for bass. I heard one with (18) 15" JL W6s and (6) VLX-400s. From then on I was hooked.
  5. I know pseudo, as in kinda, but not really. I know passive radiators don't utilize the rear wave like a port does. Anyway, it was more of a joke than a serious statement
  6. Well I said pseudo, meaning that the passive radiators kinda act like a port.
  7. doesn't that make it a pseudo 6th order?
  8. series each subs coils, then parallel the subs. the first option http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~12
  9. forget what they rest at. you have D1s. you get .25, 1 or 4 ohms.
  10. if you dual 1s, then you are either at .25, 1, or 4 ohms. how is your gain set? Are you turning it up to compensate when you wire the subs to a higher ohm load?
  11. i like the subtle changes in the mobile theme.
  12. Easier to use some bolt terminals and split the wire at the terminal.
  13. you're and i'm not the one who called someone a smartass for not doing something that is impossible.
  14. no shit. one day, people will realize this.
  15. well if you would have looked at my sig it would have saved you the trouble of being a smart ass in your first post....but no. I have D4's wired to 1 ohm and its all depending on the price I could find one for because most the 3500's I've seen are more than 2 1500's.. if you would have read what he wrote you would have seen he is on a mobile version and can't see sigs...
  16. He hasn't bought equipment yet.
  17. so i read up real quick. they create turbulence around the golf ball, which reduces drag. Read here, I did http://entertainment.howstuffworks.com/sports/golf/basics/question37.htm maybe it would work in a port, I don't know
  18. don't dimples add turbulence? I thought that is why they were on golf balls. Seems you would want to avoid turbulence in a port. but that just a guess.
  19. other than the amp being a bit more efficient, the electrical requirement for 1800 watts is pretty much the same no matter what amp is doing 1800 watts. Yes, running a 3.5k at 2ohms is less electrical than running it at 1ohm. There is really no benefit for you to do that though, so if you haven't bought the amp yet, buy one that is closer to the 1ohm power output you need. If you already have the amp, then you can run it at 2ohms and do just fine.
  20. Exactly what I'm getting at. A 1500 watt sub running two ohms off a DC 3.5k seems to be a pretty good match. so what exactly is your question then?
  21. it says on their website it does 1800watts @ 2ohms. Try helping yourself maybe?
×
×
  • Create New...