R3nOSlaPP

o it'll have more than that it will be on the front of the box with the sub firing upward just to show the magnet

damn thanks man! alot cheaper than i thought

window will be 14 inches by 9 inches possibly smaller

alright thanks for the replies guys any know how expensive a 14 x 9 3/4 inch thick plexi sheet is?

3/4 is a little thick dont you think? i was thinking around 3/8 then screw it to the box every inch to inch and a half

alright guys im looking to do one on my btl box gotta show the magnet some love my question is how thick of plexi should i get and can i just use caulking to seal it like on the edges of the box after ive screwed it to the box? any help will be greatly appreciated

on that mb quart you linked have you heard anything about them? do they do rated or atleast close to rated?

confidence and patience..if you dont have a date on which it needs to be done take your time on it ive built 3 boxes so far and none are perfect so dont get discouraged if it doesnt turn out exactly how you have it drawn out

havin a huge bbq with all the friends couple kegs some good food and just have a good time be safe everyone if you drink dont drive now lets party!

steve is the man! good job on the upgrade pages load so fast now only thing that bogs it down is when people upload ginormous pics in a build thread but not your fault good job steve and everyone one who was apart of it

yessir

ahh okay gotcha id go 5 ported to like 31 hz it would be a low end monster then maybe down the road put more power on em

I know they're not the best subs but they're the best I can afford I'm going to school and only able to work part time plus I'm 18 so think it's pretty good all things considered okay with that being said why not go like 2 18's of a good strong brand instead of kicker (not hating or anything)

what kind of power are you running to them?

http://www.ascendantaudio.com/mayhem.php

thought maybe 3 10's lvl 4 xls? that would be a huge upgrade and in a proper box

sounds good man!

get y splitters the only problem with this (since im doing it on my pioneer with only 1 pre out) is that all the mids in the doors and in the front of the vehicle will be faded to the rear meaning your mids and highs will be picking up alot of the bass as well but if you have a mid/high amp then just dont crank the gain and put the lpf higher

so what exactly is your question?

that air forces is sooo sick!!!!! good job

im diggin it man sounds good

do you have a date on which this will be released to the public? and is the power/ground 1/0 or 4 guage?

do it but dont use that gain on the amp give a good clean signal an see how long the last!

just got a stinger hook up the remote to your deck and the 12v (red) to the power on your amp then find a ground for the voltmeter then you can go down to a autozone or kragen or whatever autoparts store you have and they should be able to check the voltage at your amplifier then pop the cover off the voltmeter and theres a little blue and yellow knob which adjusts the voltage reading so its accurate

i know for me its louder when i open the driver door (and i have a baby system) edit: and to answer your question i would say yes since with the door open all the sound waves are free to move as they please